CMF7061R900BER6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are commonly referred to as fixed resistors because their electrical resistance does not change. Fixed resistors consist of a piece of resistive material, wrapped in a coil or spiral, which is then soldered to the circuit board. The ratio of electrical current to the voltage on these resistors is determined by the fixed amount of material in each coil. CMF7061R900BER6 is a common type of Through Hole Resistor.

The CMF7061R900BER6 is a metal film resistor with a power rating of 1/8th Watt, which is suitable for most applications. The resistance value of this resistor is 900 ohms or 900Ω and the tolerance is 5%. The lead shape is straight and the size is 0.125 inches or 3.2mm.

The CMF7061R900BER6 is mainly used in low voltage circuits due to its power rating and resistance value, such as for voltage dividers, circuit dampening, voltage regulation, and peak detections. It is also used to create a high-impedance source or to buffer components connected to sensitive circuits. The resistor is also used to filter out noise and protect components from short circuits or voltage spikes.

In addition, the CMF7061R900BER6 resistor can also be used for power supply rail decoupling, in order to reduce the electrical noise generated from a power converter, or to provide a DC bias for a circuit. It is also used to measure current in a circuit or to feed a reference voltage to an analog input.

The CMF7061R900BER6 works on the principle of Ohm’s law, which states that the current in a circuit is directly proportional to the voltage across the circuit. This means that the voltage can be divided by the value of the resistor to determine the current through the resistance. This allows the user to understand how much current the resistor can handle and make adjustments accordingly.

The resistor is also designed to operate at a maximum temperature of +125°C and can handle up to 1/8 Watt. This means it can be used in a variety of applications, where different levels of power or voltage are required. It is also designed with a 5% tolerance, meaning that it can handle slight variations in voltage without affecting its performance, making it suitable for use in precision circuits.

The CMF7061R900BER6 is a great choice for any application that requires a resistor with a low power rating and a high resistance value. Its 5% tolerance makes it suitable for precision circuitry, while its ability to handle high temperatures makes it well-suited for industrial applications. It is also versatile, allowing for a variety of uses where different levels of power and voltage are needed.

The specific data is subject to PDF, and the above content is for reference