CMR06F681FODM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Mica and polytetrafluoroethylene (PTFE) capacitors are two of the most widely used capacitor types in the electronics industry. The CMR06F681FODM is a mica and PTFE capacitor that is designed for use in industrial, commercial and consumer applications. It is a small, reliable capacitor with low leakage current, high impulse, high capacitance and good temperature stability.

The CMR06F681FODM capacitor consists of two layers of mica and PTFE material with a metallized layer, or film, of aluminum on each side. The aluminum provides the electrical connection between the two layers. The capacitor acts like a filter, trapping electrical noise and smoothing out signal fluctuations. This helps to improve electrical signal quality and reduce interference from external sources.

There are two main types of CMR06F681FODM capacitors available. One has a standard lead-free solderable post and the other has a self-bonding type post. The lead-free post is designed for use with lead-free solder and supports a maximum temperature of 240 degrees Celsius. The self-bonding post is designed for soldering in place without solder and supports temperatures up to 200 degrees Celsius. The CMR06F681FODM capacitors can also be used in circuits where temperatures exceed 240 degrees Celsius, as they are designed to withstand high impulse operation up to 275 degrees Celsius.

The CMR06F681FODM capacitor is used in a wide range of applications including audio equipment, digital and analog circuitry, test and measurement equipment, power supplies, radio frequency amplifiers, and more. It has a wide operating temperature range of -55 to +125 degrees Celsius and a wide range of capacitance values from 0.01uF to 0.047uF. Its load life at 105 degrees Celsius is 85,000 hours.

The working principle of the CMR06F681FODM capacitor is the same as that of any other capacitor. The charge on the two plates build up until it reaches a point where the voltage drops to zero, at which point the capacitance is equal to zero. The total capacitance of the capacitor is determined by the area of the plates, the distance between them and the dielectric (PTFE) material between them. The larger the total area of the plates and the thinner the dielectric material, the higher the capacitance of the capacitor.

In addition to its use as a filter, the CMR06F681FODM capacitor can also be used as a timing component or a motor power switch. It is also used as an AC ripple filter and DC blocking capacitor. It is suitable for electronic applications in automotive, computer and communications systems.

The CMR06F681FODM capacitor is a reliable component that is used in a variety of applications. Its robust structure and good temperature stability make it an ideal choice for industrial, commercial and consumer applications. Its high capacitance and low leakage current make it a good choice for use in AC ripple filters and other applications where a stable output is needed. Its wide operating temperature range and variety of capacitance values make it suitable for many different applications.

The specific data is subject to PDF, and the above content is for reference