Allicdata Part #: | CMT-8116-B-ND |
Manufacturer Part#: |
CMT-8116-B |
Price: | $ 3.93 |
Product Category: | Filters |
Manufacturer: | Triad Magnetics |
Short Description: | CMC 50MH 2.3A 2LN TH |
More Detail: | 50mH @ 1kHz 2 Line Common Mode Choke Through Hole ... |
DataSheet: | CMT-8116-B Datasheet/PDF |
Quantity: | 1000 |
90 +: | $ 3.56965 |
Series: | CMT |
Packaging: | Bulk |
Part Status: | Active |
Filter Type: | Power Line |
Number of Lines: | 2 |
Inductance @ Frequency: | 50mH @ 1kHz |
Current Rating (Max): | 2.3A |
DC Resistance (DCR) (Max): | 450 mOhm |
Voltage Rating - DC: | -- |
Voltage Rating - AC: | 250V |
Operating Temperature: | -55°C ~ 105°C |
Ratings: | -- |
Approvals: | -- |
Features: | ESD |
Mounting Type: | Through Hole |
Size / Dimension: | 1.550" L x 0.800" W (39.37mm x 20.32mm) |
Height (Max): | 1.650" (41.91mm) |
Package / Case: | Vertical, 4 PC Pin |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes
Common mode chokes are used in electronic circuits for providing a path to pass currents. Common mode chokes are commonly uses in RF applications where the current is required to travel in a controlled manner from one point to another. Common mode chokes are made with either ferrite toroids or with ferrite rods that have been wrapped in a wire winding. The most common applications for common mode chokes are in power supply filtering and noise suppression and reducing EMI/RFI interference.
The CMT-8116-B is a common mode choke manufactured by KEMET. This particular choke is designed to suppress common mode noise between two lines with up to 10 A of current. The design of the choke allows for high common-mode rejection and highDC current handling capability. The CMT-8116-B is designed to reduce both electrical and magnetic noise over a wide frequency range and is ideal for use in a wide range of applications.
The working principle of the CMT-8116-B involves creating a loop with a wire winding. This winding is composed of multiple turns which creates a "magnetic flux", otherwise known as a magnetic field. This magnetic field reacts with the current that is passing through the winding, creating an opposing magnetic field that prevents the current from changing direction. By creating this opposing magnetic field, EMI/RFI interference is reduced and the current remains on its correct path.
The CMT-8116-B can be used in a variety of applications ranging from industrial to automotive electronics. It is often used as an EMI filter in power supplies and signal conditioning applications, in computers and audio equipment, and in automotive electronics. The CMT-8116-B has a wide frequency range (DC to 20MHz) that allows it to be used in a variety of applications. It is also a packaged unit, which makes it a cost-effective solution for applications that require EMI/RFI suppression.
In conclusion, the CMT-8116-B is a commonmode choke from KEMET used to reduce electrical and magnetic noise in a wide variety of applications. Its working principle involves creating an opposing magnetic field that prevents current from changing direction, thus reducing interference. It is a packaged unit that makes it cost effective and it has a wide frequency range.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...