CP2-HB125-GA1-TG30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane connectors are electrical connectors designed for connecting multiple circuit boards together in a computer system. These are typically used in high speed digital systems where data rates are high and precise signal routing is required. Many types of backplane connectors exist in the industry but the two most common are hard metric and standard.

CP2-HB125-GA1-TG30 Application Field and Working Principle

CP2-HB125-GA1-TG30 is a hard metric backplane connector developed by Hirose Electric Company for high speed backplane applications. This connector conforms to the JEDEC (Joint Electron Device Engineering Council) standard for backplane systems. It is designed for data rates of up to 12.5 Gb/s (Gigabits per second).

CP2-HB125-GA1-TG30 is mainly used in telecommunications, transportation, industrial control, and medical equipment due to its high speed transmission capability. It is also used in multi TeraByte storage systems, instrumentation systems, and other high speed backplane applications.

The working principle of CP2-HB125-GA1-TG30 connector is based on a multi-pin high speed transmission system. It consists of two parts: a receptacle that contains two rows of high speed end-contacts and a connector header that connects to the receptacle. The connector header contains pins that are passing through the receptacle. It also has five support plates, a backshell for mechanical protection, and a strain relief for the signal lines.

The transmission pins of the connector are arranged in a staggered, angle-to-angle manner. This staggered design allows for better crosstalk performance compared to straight-line pinout connectors. The pins are also arranged in a double-sided manner, with the piece of the contacts being on one side and the other piece being on the opposite side. This configuration also reduces crosstalk and makes it possible to have a higher transmission speed.

The CP2-HB125-GA1-TG30 connector is designed for high speed signals up to 12.5 Gb/s. It has a total of 52, 8mm ground contacts and 152, 4mm signal contacts arranged in a staggered configuration. The backplane connector has a pitch of 1.27mm and is compliant with RoHS and ELV requirements.

The CP2-HB125-GA1-TG30 backplane connector offers high speed and performance and is suitable for high speed data transmission applications. It is also designed for low loss and improved signal integrity even at high frequencies. This makes the connector an ideal choice for high speed backplane interconnects.

The specific data is subject to PDF, and the above content is for reference