CPCC0339R00JE66

Series:	CPCC
Packaging:	Bulk
Part Status:	Active
Resistance:	39 Ohms
Tolerance:	±5%
Power (Watts):	3W
Composition:	Wirewound
Features:	Flame Proof, Safety
Temperature Coefficient:	±400ppm/°C
Operating Temperature:	-65°C ~ 275°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.472" L x 0.315" W (12.00mm x 8.00mm)
Height - Seated (Max):	0.984" (24.99mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through hole resistors are electric components designed to control electrical current in various circuits. They are usually made up of a type of semiconductor material wrapped in an insulating material, such as ceramic. The resistor protects the circuit from excessive current and helps regulate the power supply. Resistors are used in a variety of electronic devices from mobile phones to medical equipment to computers.

CPCC0339R00JE66 application field and working principle

The CPCC0339R00JE66 is a through hole resistor component. It is a fixed-type resistor with a resistance of 0.0045 ohms per square. It can be used in both AC and DC circuits and is suitable for controlling the current in the circuit to keep in within safe limits. The CPCC0339R00JE66 works by using a polysilicon layer to reduce the flow of current through the circuit. This polysilicon layer is sandwiched between two layers of insulating material that help contain the electric current, preventing it from overrunning the safety of the circuit. The polysilicon layer has a set resistance value, which is determined by the number of squares in the design. The resistance will depend on the length and width of the squares, as well as how densely packed the squares are. The CPCC0339R00JE66 also provides the ability to adjust the resistance, allowing you to control the flow of current through the circuit. As the resistor warms up, the polysilicon layer will expand, causing an increase in resistance. This can be adjusted by replacing the resistor with one of a higher or lower resistance rating. Alternatively, the resistance can be reduced by adjusting the size of the squares in the resistor.

Uses of the Resistor

Through hole resistors are used in many applications, including in automotive, industrial, and medical electronic circuits. The CPCC0339R00JE66, specifically, is used in automotive electric circuits as they provide an affordable and efficient way to control the voltage and current in the circuit. It is also used in complex industrial control systems in which it need to maintain the voltage levels, as well as in medical equipment which constantly monitors and regulates the current.

Conclusion

The CPCC0339R00JE66 is a through hole resistor component with a resistance of 0.0045 ohms per square. It is used in a variety of applications, including automotive, industrial, and medical electronic circuits, to regulate voltage and current levels. The resistor works by using a polysilicon layer to reduce the flow of current through the circuit, and it can also be adjusted by changing the resistance rating or the size of the squares.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description