CPCC05100R0JE66

Series:	CPCC
Packaging:	Bulk
Part Status:	Active
Resistance:	100 Ohms
Tolerance:	±5%
Power (Watts):	5W
Composition:	Wirewound
Features:	Flame Proof, Safety
Temperature Coefficient:	±400ppm/°C
Operating Temperature:	-65°C ~ 275°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.512" L x 0.354" W (13.00mm x 9.00mm)
Height - Seated (Max):	1.003" (25.48mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors - CPCC05100R0JE66 Application Field and Working Principle

Through hole resistors, such as CPCC05100R0JE66, are one of the most common types of resistors used in electronics. Through hole resistors are typically axial components composed of a metal wire or winding around a substrate that shows resistance to electric current flow. As their names imply, these resistors are typically installed through the holes of a printed circuit board.Through hole resistors are widely used in electrical and electronic circuits. For example, they can be used as voltage dividers, as current-limiting resistors and as noise-shaped resistors for EMI/RFI filters. Their compact and reliable nature also make them ideal for use as pull-up and pull-down resistors in digital circuits.Despite their simple nature, through hole resistors still feature varying levels of complexity. The key difference between them is their working principle. The most basic type of through hole resistor is a carbon film resistor, which is constructed from a substance that allows conduction of electricity in certain directions. This substance is then deposited onto a substrate and is bound together by a film of woven carbon which is used to control the current flow. Since carbon film resistors are stable and cheap, they are the most common type of through hole resistor used in commercial circuits.Another type of through hole resistor is a wirewound resistor. This type of resistor is made up of a spool of fine-gauge insulated copper wire, which is then wrapped around an insulating substrate, held in place via its winding. The resistance of a wirewound resistor is dependent on both the wire and the substrate. This type of resistor is more expensive than carbon film resistors, but they are also more durable and have better temperature performance and stability. Wirewound resistors are often used in industrial applications, where they are expected to operate at higher voltages and higher power levels than carbon film resistors.Both carbon film and wirewound resistors have their particular features and applications. However, they both rely on the same basic working principle. The metal wire or winding is used to conduct the electricity, while the specialised substrate controls the current flow and limits the amount of energy that can pass through it.Through hole resistors such as the CPCC05100R0JE66 are one of the most popular types of resistors used in electronics. These components are reliable, durable, and affordable, making them great for both commercial and industrial applications. Additionally, they have a simple working principle, which is based on a substrate controlling the current flow, and a metal wire or winding conducting it. By understanding the application field and working principle of the CPCC05100R0JE66, engineers can accurately select the right resistor for their system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description