CPCF0324K00KE66

Series:	CPCF
Packaging:	Bulk
Part Status:	Active
Resistance:	24 kOhms
Tolerance:	±10%
Power (Watts):	3W
Composition:	Metal Oxide Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±400ppm/°C
Operating Temperature:	-65°C ~ 225°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.472" L x 0.315" W (12.00mm x 8.00mm)
Height - Seated (Max):	0.984" (24.99mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electrical components used for controlling current flow in a circuit. The resistor’s value, measured in ohms, denotes the amount of resistance it provides to current flowing through it.The CPCF0324K00KE66 through-hole resistor is a general-purpose, non-inductive type resistor. It has a high resistance to thermal shock and is used in applications that require both high reliability and stable electrical characteristics. This type of resistor is mainly used in power electronic circuits, lighting control systems, automation systems, and consumer electronics. Its low stray inductance also makes it suitable for use in applications where noise levels must be kept low.The CPCF0324K00KE66 Through Hole Resistor is made up of a thick, epoxy-coated metal oxide resistor with a terminations at both ends. The resistor is typically constructed out of metal oxide on an insulating substrate. The substrate is encapsulated in an epoxy casing for environmental protection. Depending upon the application, the resistor body may also contain elements of tantalum or mica as well.The CPCF0324K00KE66 Through Hole Resistor’s operating principle is based on the fact that current flow through a resistance causes heat to be generated. The resistor body acts as a barrier to the current flow and dissipates the heat generated in the process. This heat is largely conducted away through the epoxy case. The amount of resistance in the resistor is fixed at almost all times, with small changes being possible due to variations in temperature and conditions of the surrounding environment.In general, the CPCF0324K00KE66 Through Hole Resistor is a high reliability, stable device capable of withstanding high temperatures and vibrations. It is capable of providing resistance in the range of 0.1ohm to 100Kohm and is designed to meet strict dimensional requirements. The temperature coefficient is low and usually does not exceed 50 ppm/deg C. It has a good resistance to humidity and its load life performance is very good.The CPCF0324K00KE66 Through Hole Resistor is an ideal choice for a wide variety of applications. It can be used in lighting control systems, power electronic circuits, consumer electronics, and automation systems. Its low stray inductance makes it suitable for use in applications where noise levels must be kept low. It is also used in applications where the requirements for heat dissipation and temperature coefficient are important.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description