CPCF035K600JE66

Series:	CPCF
Packaging:	Bulk
Part Status:	Active
Resistance:	5.6 kOhms
Tolerance:	±5%
Power (Watts):	3W
Composition:	Metal Oxide Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±400ppm/°C
Operating Temperature:	-65°C ~ 225°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.472" L x 0.315" W (12.00mm x 8.00mm)
Height - Seated (Max):	0.984" (24.99mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, also known as through-hole technology, are components with two or more electrodes embedded onto a ceramic substrate, that are mounted to a circuit board (PCB) through a number of holes. The component is then soldered to the board, resulting in a singular, permanent component. The primary purpose of through hole resistors is to regulate the voltage and current flow in a circuit by actively dissipating unwanted electrical energy.The CPCF035K600JE66 is a through hole resistor, typically used in voltage sensing applications. It offers improved performance over other type of resistors, thanks to its high dielectric strength, low temperature coefficient, and its ability to handle high voltage and current. The resistor features an effective resistance range of 0.35k-600 ohms with a power rating of 0.125 watts. It also boasts superior performance under high temperature environments, with a maximum operating temperature of +125°C.The working principle of the CPCF035K600JE66 is based on a type of resistor called a potential divider. The resistor consists of two dissimilar conductive metals, with the potential difference between them acting as the basis for resistance. When an electric current is applied, the voltage across the conductive paths is proportional to the current applied, which slows the current and reduces its amount. The resulting voltage drop across the resistor is equal to the product of the electric current and the resistors applied resistance.This type of resistor can be used in many applications, but typically is used in sensing circuits. These circuits are used to measure the voltage level in different circuits and then to generate a signal based on the voltage level. This signal is then used to trigger a reaction, like turning on a light or sounding an alarm. The thin film construction of the CPCF035K600JE66 makes it an ideal choice for such applications as it is capable of handling high current loads while also providing accurate, reliable readings.Another application where through hole resistors are often used is in power circuits. Here, they are used to reduce the amount of voltage or current passing through a circuit, thereby allowing for more efficient power distribution. Additionally, by reducing the amount of power loss, overall power consumption is also reduced. The CPCF035K600JE66 is widely used in this capacity due to its small size, its high operating voltage and its stable resistive characteristic.Finally, through hole resistors are often used in audio equipment. Here, they are utilized in order to reduce the volume of an audio signal, as well as to control the tone and filtering of frequencies. The thin film construction of the CPCF035K600JE66 again makes it a great choice for this purpose, as it can handle high levels of current without overheating, and its resistance remains stable over varying temperatures.As can be seen, the CPCF035K600JE66 through hole resistor is used in a variety of different applications. Its small size, high dielectric strength, and resistance range of 0.35k-600 ohms, makes it a perfect choice for a variety of voltage sensing, power, and audio applications. Overall, through hole resistors can offer improved performance over other types of resistors, and offer distinct advantages in terms of cost and power efficiency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description