CPCF07750R0JE66

Series:	CPCF
Packaging:	Bulk
Part Status:	Active
Resistance:	750 Ohms
Tolerance:	±5%
Power (Watts):	7W
Composition:	Metal Oxide Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±400ppm/°C
Operating Temperature:	-65°C ~ 225°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.512" L x 0.354" W (13.00mm x 9.00mm)
Height - Seated (Max):	1.594" (40.50mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through hole resistors are components built for electrical resistance or voltage regulation in power supply applications. The terms refer to how resistors are physically mounted to a printed circuit board (PCB): the components have a mounting hole or “through hole” and the leads of the resistors are pushed through the hole and soldered to traces on the board, thus giving "through-hole" resistors their name.

CPCF07750R0JE66

The CPCF07750R0JE66 is a through hole resistor from a series of resistors produced by Panasonic. It is a non-inductive, radial leaded, paper-film, ultra-low resistance, precision surface-mount resistor with a reliable temperature coefficient of below 50ppm/°C. The CPCF07750R0JE66 is designed for voltage regulation in power supply applications. The resistor measures 2.5mm in diameter and 17.5mm in length. Its maximum power rating is 0.2W and maximum series resistance is 75R.

Application Field and Working Principle

The CPCF07750R0JE66 is designed for use in power supply applications such as LED lighting, consumer electronics, communication systems, and digital circuits. In these applications, current is delivered from an external power source to a load (which may be an LED light, a consumer electronics device, or a communication system). The current from the power source flows through the through hole resistor before reaching the load.The working principle of the CPCF07750R0JE66 is voltage regulation. It is designed to provide regulated voltage to the load. As the current flows through the resistor, its resistance value prevents the current from flowing too quickly, thus allowing the voltage level within the circuit to remain regulated. This in turn guarantees that the LED lights, consumer electronics devices, and communication systems work properly.

Properties and Advantages

The CPCF07750R0JE66 has several properties and advantages that make it particularly suitable for use in power supply applications. First, the resistor has a reliable temperature coefficient of less than 50ppm/°C. This ensures that regardless of how hot the environment gets, the resistor is always able to provide a regulated voltage to the load because its resistance value will remain consistent.Second, the CPCF07750R0JE66 is designed to dissipate heat quickly. This is beneficial for use in power supply applications because it ensures that the resistor is not damaged by the high heat generated by the current flowing through it.Third, the CPCF07750R0JE66 has a maximum series resistance of 75R and a maximum power rating of 0.2W. The low resistance and low power rating of the resistor make it ideal for regulating voltage in power supply applications because it is not too large, bulky, or energy consuming.Finally, the CPCF07750R0JE66 has a compact size. As mentioned, the resistor measures 2.5mm in diameter and 17.5mm in length. This small size makes it easy to install and use in even the most compact of spaces.

Conclusion

The CPCF07750R0JE66 is a through hole resistor designed for use in power supply applications such as LED lighting, consumer electronics, communication systems, and digital circuits. The resistor’s reliable temperature coefficient, ability to dissipate heat quickly, low resistance and power rating, and compact size make it well-suited for voltage regulation in power supply applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description