CPL-5210-10-TNC-79

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional Couplers are among the most essential components of any radio system. They are used to link two separate radio links and isolate them from each other. The CPL-5210-10-TNC-79 is a wide-band, high efficiency, Low-Loss, wide-dynamic-range RF Directional Coupler. This device is designed for applications in the HF, VHF, UHF and microwave wireless communications networks.

The CPL-5210-10-TNC-79 is an easy-to-install, economical device with a wide range of applications. It is designed to provide very low insertion loss and high directivity. The coupler has an extremely low frequency range of 0 Hz to 10 GHz, allowing it to be used in a wide variety of applications from low frequency broadband applications to high end precision applications. The device is rated to handle up to 10dB of reverse input power.

The working principle of the CPL-5210-10-TNC-79 is based on a transformer coupling mechanism. This is a passive device, which means there are no active circuits involved in its operation. The device consists of two coils interconnected by a core. One coil is connected to the input signal and the other one is connected to the output signal. As the input signal is applied to the input coil, it induces a current in the output coil. The induced current in the output circuit is then used to measure the level of the signal at the output of the device.

The device incorporates two ports. The input port is the one from which the signal enters the device, and the output port is the one at which the signal exits the device. The ports are isolated from each other to prevent crosstalk between them. The ports are also designed to be impedance matched to ensure that the signal does not suffer any signal losses as it passes through the device.

The CPL-5210-10-TNC-79 is used in a wide range of applications, including digital radio, point-to-point microwave links, and digital satellite communications systems. It can be used for short-range and long-range signal measurement, the measurement of signal amplitude, and the measurement of signal phase. The device can also be used to measure the noise figure in a system, or to determine the gain and linearity of an amplifier.

The CPL-5210-10-TNC-79 is designed for use in a variety of applications, including cellular phones, personal communication systems, and other wireless systems. It is also used in commercial and military communication systems. The device has been designed to perform in a wide temperature range and can be easily installed in any enclosure. The coupler can be used in both outdoor and indoor applications.

In summary, the CPL-5210-10-TNC-79 is a wide-band, high efficiency, low-loss, wide-dynamic-range RF Directional Coupler. It is designed for use in a variety of applications, from low frequency broadband applications to high end precision applications. The device is based on a transformer coupling mechanism and has two isolated ports with an impedance matched design. The device has a wide frequency range and can be used to measure signal level, noise figure, and linearity. The CPL-5210-10-TNC-79 is an easy-to-install, economical device, and can be used in both indoor and outdoor applications.

The specific data is subject to PDF, and the above content is for reference