| Allicdata Part #: | CPL-5211-30-SMA-79-ND |
| Manufacturer Part#: |
CPL-5211-30-SMA-79 |
| Price: | $ 0.00 |
| Product Category: | RF/IF and RFID |
| Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
| Short Description: | COUPLER 30 DB 1-2GHZ |
| More Detail: | RF Directional Coupler 1GHz ~ 2GHz 30dB ± 1dB 50W... |
| DataSheet: |  CPL-5211-30-SMA-79 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Series: | -- |
| Packaging: | Bulk |
| Part Status: | Active |
| Coupler Type: | Standard |
| Frequency: | 1GHz ~ 2GHz |
| Coupling Factor: | 30dB ± 1dB |
| Applications: | -- |
| Insertion Loss: | 0.2dB |
| Power - Max: | 50W |
| Isolation: | -- |
| Return Loss: | -- |
| Package / Case: | SMA In-Line Module |
| Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The CPL-5211-30-SMA-79 is an RF directional coupler, which is widely used in a variety of applications where an RF signal is to be monitored and/or monitored remotely. This type of coupler is typically used for impedance matching and has the ability to measure the transmission power levels of the signal.
The CPL-5211-30-SMA-79 is designed with two ports in the front, one of which is the input port and the other being the output port. The coupling factor for this device is 30 dB. This means that 30 dB of the input signal will be coupled to the output port. The input and output ports are both fabricated with 50 ohm SMA connectors and are typical used in applications such as cellular systems, WiMAX systems, GPS systems, and RF communication systems.
The working principle of the CPL-5211-30-SMA-79 is quite simple. When an RF signal is applied to the input port, it is coupled across the gap between the two ports, and the output port will be the same as the input. However, due to the coupling factor of the device, only a fraction of the input signal will be coupled across to the output port. This fraction is determined by the coupling factor of the device.
The CPL-5211-30-SMA-79 is useful in a variety of applications. It is commonly used in radio systems for measuring the transmission power of a signal. It is also used in satellite TV systems, radio communication systems, and radio broadcast systems. It is also used in cellular systems, allowing the user to monitor the power levels of the signal without significantly affecting the main transmission path.
In addition, the CPL-5211-30-SMA-79 is sometimes used in instrumentation systems, such as spectrum analyzers and test equipments. It is also used in data acquisition systems to monitor the power levels of data signals. In addition, it can be used to monitor the performance of wireless antennas over a period of time.
The CPL-5211-30-SMA-79 is a very versatile device and is widely used in a variety of applications. It allows users to monitor and measure the power levels of RF signals, without significantly affecting the main signal path. This makes it very useful in many applications, including satellite TV, radio communication, instrumentation, and data acquisition.
The specific data is subject to PDF, and the above content is for reference
COUPLER 6 DB 6-18GHZRF Directional Coupl...
COUPLER 20 DB 2-18GHZRF Directional Coup...
COUPLER HYBRID 1.2-1.85GHZRF Directional...
DIRECTIONAL COUPLERRF Directional Couple...
DIRECTIONAL COUPLER 1100MHZ 0805RF Direc...
DIRECTIONAL COUPLER 2100MHZ 0603RF Direc...