CPL-5213-06-NNN-79

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CPL-5213-06-NNN-79 is a type of RF Directional Coupler, which is used as a power splitter to split and provide the entire signal power in two parts among two output paths. It consists of two sets of circuit elements, one made up of capacitors and the other consisting of inductors. The two elements are connected such that currents going into circuit elements are ideally equal. This type of coupler works on the same principle as the conventional impedance matching networks, but works on the transmission line.

The main purpose of such couplers is to reduce the mismatch between the transmission and receiving ends of the RF signal. This is done by providing a constant and symmetrical current to both outputs, thus completely eliminating any illusion of cross polarization. Since the signals sent to the output are perfectly balanced, any destructive interference is minimized, thereby increasing the efficiency of the system.

The CPL-5213-06-NNN-79 has a maximum power of 200 watts, with a maximum standing wave ratio of 1.4. The standing wave ratio measures the difference between the incoming and outgoing signals of the coupler, so that the closer the ratio is to 1, the greater the signal strength can be transmitted. This ensures that maximum transmission power is obtained and that signal integrity is maintained.

The CPL-5213-06-NNN-79 is widely used in radio telecommunications systems to provide greater freedom of frequency selection and improved antenna matching. This type of coupler can also be employed as a power combiner, allowing two or more signals to be combined into a single signal using the maximum allowable power. This improves the overall efficiency of the system, as it eliminates the need to use more powerful components that would have been needed if each signal had to be separately amplified.

The CPL-5213-06-NNN-79 is also commonly used in home wiring systems, for example in wireless networks, to split the power of the signal among multiple sources and multiple outputs. It is ideal for applications where multiple outputs are needed, such as a home theater system. This type of coupler, due to its low insertion losses and its ability to work with multiple outputs, makes it an attractive choice for those looking to improve their wireless network coverage.

In summary, the CPL-5213-06-NNN-79 is an RF directional coupler that is used to reduce mismatch between transmission and receiving signals by providing symmetrical and constant current into both outputs. It has a maximum power rating of 200W with an SWR of 1.4. It is primarily used in radio telecommunications systems and wireless networks for multiple outputs, and it is suitable for applications where low insertion losses and improved antenna matching are desired.

The specific data is subject to PDF, and the above content is for reference