Allicdata Part #: | CPL-5216-20-TNC-79-ND |
Manufacturer Part#: |
CPL-5216-20-TNC-79 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | COUPLER 20 DB 7-18GHZ |
More Detail: | RF Directional Coupler 7GHz ~ 18GHz 20dB ± 1dB 50... |
DataSheet: | CPL-5216-20-TNC-79 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Coupler Type: | Standard |
Frequency: | 7GHz ~ 18GHz |
Coupling Factor: | 20dB ± 1dB |
Applications: | -- |
Insertion Loss: | 0.5dB |
Power - Max: | 50W |
Isolation: | -- |
Return Loss: | -- |
Package / Case: | TNC In-Line Module |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Directional Coupler
The CPL-5216-20-TNC-79 is an RF directional coupler, which is designed for applications where high-performance, low-loss signal isolation is required. It offers excellent frequency range coverage and linearity performance in the 1–2 GHz range. The coupler provides excellent isolation between the input and output signals while maintaining low insertion loss across the frequency range. Additionally, the coupler is designed to operate in high-impedance environment, providing high dynamic range.
Application Field
The CPL-5216-20-TNC-79 can be used to measure the strength of a signal on a given frequency. Additionally, it can be used in networks where multiple networks need to communicate with each other to prevent any interference or crosstalk between them. Furthermore, the coupler can be used as an amplifier for broadband applications, since it can provide up to 20 dB of gain across the 1–2 GHz frequency range.
Working Principle
The CPL-5216-20-TNC-79 works by transforming an incoming signal and splitting it into two components: an input and an output. The input is converted into current while the output is converted into voltage. This process is called impedance matching. The impedance of the input is kept at the same value across the frequency range, which prevents any distortion of the signal due to varying input impedance. The signal is then sent through the two direction couplers, which are designed to isolate the two signals while preventing any interference or crosstalk.
The coupler consists of two resistors in parallel, which create a voltage drop between the two components of the signal. The resistors also act as a low-pass filter, allowing only the lower frequency components of the signal to pass through. The coupler also contains a temperature-compensated capacitor, which helps to maintain the stability of the signal.
The output from the directional coupler is then sent to an amplifier, which boosts the signal and then sends it to the receiver. The receiver then amplifies the signal and the receiver processes the amplified signal. The amplified signal is then transmitted back to the transmitter to be sent out over the air. This entire process helps to ensure that the signal remains consistent across the frequency range.
Conclusion
The CPL-5216-20-TNC-79 is an RF directional coupler designed for high-performance, low-loss signal isolation in the 1-2 GHz range. It offers excellent frequency range coverage and linearity performance and its compact size makes it ideal for use in a variety of applications. The working principle of the CPL-5216-20-TNC-79 is based on impedance matching and split components, which provide excellent isolation between the input and output signals while maintaining low insertion loss across the frequency range.
The specific data is subject to PDF, and the above content is for reference
COUPLER 6 DB 6-18GHZRF Directional Coupl...
COUPLER 20 DB 2-18GHZRF Directional Coup...
COUPLER HYBRID 1.2-1.85GHZRF Directional...
DIRECTIONAL COUPLERRF Directional Couple...
DIRECTIONAL COUPLER 1100MHZ 0805RF Direc...
DIRECTIONAL COUPLER 2100MHZ 0603RF Direc...