Allicdata Part #: | CPL-5222-10-TNC-79-ND |
Manufacturer Part#: |
CPL-5222-10-TNC-79 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | COUPLER 10 DB 2-8GHZ |
More Detail: | RF Directional Coupler 2GHz ~ 8GHz 10dB ± 1dB 50W... |
DataSheet: | CPL-5222-10-TNC-79 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Coupler Type: | Standard |
Frequency: | 2GHz ~ 8GHz |
Coupling Factor: | 10dB ± 1dB |
Applications: | -- |
Insertion Loss: | 0.6dB |
Power - Max: | 50W |
Isolation: | -- |
Return Loss: | -- |
Package / Case: | TNC In-Line Module |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF directional couplers are a type of microwave component that can be used for many different applications. The CPL-5222-10-TNC-79 is a particularly useful one of these components, due to its small size, low power consumption, and high efficiency.
The main use of the CPL-5222-10-TNC-79 is in applications where the signal needs to be split or combined. This is because the device contains a special directional coupler. This coupler allows for the signal to be passed through with minimal losses. It also provides a high level of isolation between the source and the load.
The working principle of the CPL-5222-10-TNC-79 is based on the transmission line theory. The device consists of two separate transmission lines that are located in an electromagnetic environment. The first transmission line is the input, and it is responsible for receiving the incoming signal. The second transmission line is the output, and it is responsible for sending the signal to the load.
When the input signal is applied, the electromagnetic environment around the two transmission lines will cause the signal to split into two separate waves. One wave will be sent to the input line, and the other will be sent to the output line. The ratio between the input and output waves will depend on the coupling coefficient of the directional coupler.
The device operates in two modes, a reflection mode and a transmission mode. In the reflection mode, the reflected wave will be sent back to the source, while in the transmission mode, the end result will be that the signal is split into two parts, one part will be sent to the source, and the other part will be sent to the output line.
The couplers are also used in applications where it is important to attenuate or isolate signals. In this case, the signal is passed through the directional coupler at the input and then combined at the output. The wave that is passed through will be attenuated, while the other wave will be isolated. The amount of attenuation and isolation will depend on the coupling coefficient of the directional coupler.
The CPL-5222-10-TNC-79 is a low power consumption, high efficiency, and small size directional coupler that can be used in a variety of applications. It can be used to split, combine, attenuate, or isolate a signal, making it a versatile and useful component.
The specific data is subject to PDF, and the above content is for reference
COUPLER 6 DB 6-18GHZRF Directional Coupl...
COUPLER 20 DB 2-18GHZRF Directional Coup...
COUPLER HYBRID 1.2-1.85GHZRF Directional...
DIRECTIONAL COUPLERRF Directional Couple...
DIRECTIONAL COUPLER 1100MHZ 0805RF Direc...
DIRECTIONAL COUPLER 2100MHZ 0603RF Direc...