CPL-5226-10-SMA-79

RF Directional Couplers are components used for signal coupling and measuring in radio frequency systems. They can measure the amount of signal passing from an antenna, amplifier, or other device through them. CPL-5226-10-SMA-79 is one such RF Directional Coupler.

Application Field

CPL-5226-10-SMA-79 is suitable for all types of systems working at frequencies between 10 MHz to 2200 MHz. It can also be used for applications ranging from RF signal shielding, isolation, stability, energy management, radar, and communication systems to radio control systems. It is mainly used to measure many parameters of an RF signal in a single device, such as gain, insertion loss, directivity, and isolation. CPL-5226-10-SMA-79 is most commonly used for broadband signal measurements in satellite communication systems.

Working Principle

CPL-5226-10-SMA-79 works on the principle of reciprocity and symmetry. This principle states that the amount of energy lost or gained by a signal will be equal in both directions—as if both sides were facing each other. It is necessary for efficient operation and accurate measurements. The device also works on the principle of distributed amplifier. This means that the RF signal is amplified in small sections within the device rather than it being amplified entirely in one place.

CPL-5226-10-SMA-79 consists of the following parts: a primary port, secondary port, third port, and fourth port. The two input ports (primary and secondary) are connected to an antenna or circuit. The remaining two ports are called the output port. The output port allows the device to extract a portion of the propagated signal from the input port and send it out, making measurement possible. The degree to which the output port is connected to the input port determines the device\'s directivity.

CPL-5226-10-SMA-79 is designed to provide precise measurements and eliminate noise. It consists of shielded microstrip lines, which block out any incoming or outgoing noise signals. This makes it especially useful for measuring low-level signals and controlling distortion. It also supplies a constant output with high linearity over a wide range of input signal levels.

Advantages of CPL-5226-10-SMA-79

CPL-5226-10-SMA-79 offers many advantages over other directional couplers in the market. It is designed to be compact and light, making it easy to install and transport. It is also designed to be reliable, providing stable performance over a long period of time. The device is also designed to be low-loss, ensuring that the signal strength is maintained at all times. Furthermore, it can be used in a wide range of applications, making it a versatile device. Finally, it is designed to be very accurate, providing precise measurements of input and output power.

Conclusion

CPL-5226-10-SMA-79 is an RF Directional Coupler designed to measure the amount of signal passing from an antenna, amplifier, or other device. It is suitable for applications ranging from RF signal shielding, isolation, stability, energy management, radar, and communication systems to radio control systems. It works on the principle of reciprocity and symmetry, as well as distributed amplifier, to provide accurate measurements. It also offers many advantages, such as being compact and light, reliable, low-loss, and accurate. As such, CPL-5226-10-SMA-79 is an ideal device for measuring many parameters of an RF signal in a single device.