CPL-5230-20-TNC-79

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional Couplers are important components in communication systems and are widely used to monitor and control signals in RF systems. CPL-5230-20-TNC-79 is a type of RF Directional Coupler, which is specially designed for point-to-multipoint wireless communication applications. It is a compact, lightweight unit with a high power handling capability. The unit has an output port, which can be used for signal monitoring and control.

CPL-5230-20-TNC-79 Application Field and Working Principle

CPL-5230-20-TNC-79 was primarily designed for point to multipoint wireless communication applications. It can be used in radio links and base stations of many different types of systems, such as two way radio systems, cellular systems, microwave systems, as well as digital radio systems. It can be used as an input or output accessory for any of these systems.

The unit is also useful in antenna measurements and signal analysis. It has a detection range from 1-18GHz, and it provides an accuracy of approximately 0.25 dB. It can be used to measure transmission line loss, signal strength, and distortion.

The CPL-5230-20-TNC-79 consists of two port connections and a receiver port. The main port is the input port, while the receiver port is the output port. The two ports are connected with an attenuator cable, which reduces the signal strength and limits it to a predetermined level. This ensures that the unit can handle higher signal strengths without overloading it. The attenuator cable also stops the reflected signal from entering the receiver port. The receiver port is calibrated to a level that is ideal for the system that it is used in.

The unit also has an impedance matching feature that ensures that the signal levels are matched during transmission. This prevents distortions and signal losses. The impedance matching is also used to minimize the effects of noise from adjacent frequencies.

The CPL-5230-20-TNC-79 works by splitting the signal into two components - an input and output signal. The input signal is sent through the main port to the receiver port, where it is measured. When the signal reaches the receiver port, a signal-to-noise ratio is determined and a decision is made based on the measurements. The output signal is then sent back to the main port and the process is repeated.

The CPL-5230-20-TNC-79 is a reliable, efficient, and cost-effective unit for monitoring and controlling signals in point-to-multipoint wireless communication applications. It has a high power handling capability and an accurate impedance match, which ensure that it is well-suited for communication systems.

The specific data is subject to PDF, and the above content is for reference