CPPC1L-A3B6-56.0PD

Frequency Stability:	±100ppm
Current - Supply (Disable) (Max):	50µA
Height - Seated (Max):	0.200" (5.08mm)
Size / Dimension:	0.819" L x 0.520" W (20.80mm x 13.20mm)
Package / Case:	14-DIP Module, 4 Leads
Mounting Type:	Through Hole
Ratings:	--
Current - Supply (Max):	25mA
Operating Temperature:	-55°C ~ 125°C
Series:	FIPO™ CPP
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	56MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: CPPC1L-A3B6-56.0PD Application Field and Working Principle

In the field of oscillator technology, the CPPC1L-A3B6-56.0PD is a unique oscillator designed to provide a cost-effective, reliable and highly reproducible source of timing signals for squarewave precision electronic instruments including medical imaging systems, precision clocks and high-speed digital systems. Its broad field of application includes but is not limited to telecommunication and defense industries, robotics and navigation systems, aerospace and instrumentation applications.The CPPC1L-A3B6-56.0PD oscillator comprises an active part under the core with the main components being an integrated circuit (IC), resistors, capacitors and a voltage regulator. This core amplifier section serves to convert a low-level sinusoidal input signal into a square wave output. The power to the amplifier is regulated, thereby allowing the user to adjust the frequency, duty cycle and amplitude of the signal.The CPPC1L-A3B6-56.0PD oscillator has two distinct components — the core amplifier and the frequency control section. The primary application of the core amplifier is to provide the necessary signal output level for operation of an electronic circuit. The frequency control section is the means through which the frequency is adjusted and the signal amplitude and duty cycle regulated. The main components of the frequency control section are the oscillator feedback resistor and the gain adjuster.The core amplifier is controlled by the piezoelectric crystal, which is the basis of the oscillator\'s operation. When the crystal is energized, it produces a periodic electrical signal. The crystal can be adjusted by the gain adjuster, thus regulating the signals frequency and amplifying it. The oscillator feedback resistor serves to limit the signal amplitudes to the required levels so that it can be used to drive the electronic circuit.In terms of output power, the CPPC1L-A3B6-56.0PD oscillator is capable of providing a peak power of up to 55 mW and is capable of driving a load of up to 3.3kΩ. The temperature range of operation is – 40°C to +85°C. The frequency range produced by the oscillator is from 1Hz to 145kHz; however, the operating frequency range is from 0.1kHz to 10MHz and is adjustable.In terms of accuracy, the CPPC1L-A3B6-56.0PD oscillator is very good, having an accuracy of up to 0.1% in some cases. The accuracy of the oscillator is also highly dependent on the supply voltage, operating temperature and the device\'s tolerances.The CPPC1L-A3B6-56.0PD oscillator is quite economical in terms of power usage and can be considered efficient as its power consumption is very low. The low power consumption also makes the oscillator perfect for portable devices and long-term applications.In conclusion, the CPPC1L-A3B6-56.0PD oscillator is a reliable and accurate source of timing signals in a wide range of applications. Its wide frequency range and low power consumption make it an ideal choice for a variety of devices. Its power conversion efficiency, wide operating temperature range and accuracy make it a cost effective and efficient solution for precision timing in today\'s advanced electronic devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description