CPPC7L-A3B6-112.0TS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators, such as the CPPC7L-A3B6-112.0TS, are electrical elements used in different practical applications. The purpose of this oscillator is to create an output signal at a specific frequency determined by the design. The stored energy from the external capacitance or internal capacitance is triggered and discharged periodically to generate the oscillation nearly instantaneously.

The CPPC7L-A3B6-112.0TS oscillator is used mainly as a timer of electronic circuits without going through tedious calculations of frequency, doing it automatically and providing a signal with the desired frequency, stored in the circuit parameters.

This oscillator is mainly used in communication devices, medical equipment, automotive electronic systems, kitchen home appliances, and other applications where maintaining precise frequency regulation is vital. For example, it can be used in frequency-shift keying (FSK) radiotelephones or it can be used as a measurement unit of frequency in digital frequency synthesizers.

The working principle of the CPPC7L-A3B6-112.0TS oscillator involves an arrangement of two electronic components, a resistor and a capacitor, which are connected in parallel. This configuration forms an open loop with no external connections.

The resistance of the resistor has a strong influence on the damping of the oscillation, whereas the capacitance has much greater influence on the frequency of the oscillations because the oscillator is an electronic oscillator where an oscillation occurs at the resonance frequency of a parallel R-C circuit.

When the resistor and the capacitor are connected in parallel, the capacitance starts to charge slowly and steadily to its maximum voltage until it reaches its limit, creating an inverted waveform voltage over the resistor.

A certain amount of energy is stored in the capacitor and the current, due to the inverse waveform voltage over the resistor, will be also reversed. This alternating current keeps charging and discharging the capacitor creating a continuous amplitude and frequency regulated, and continuing oscillation.

Furthermore, the CPPC7L-A3B6-112.0TS oscillator is classified in different categories, such as Voltage Controlled Oscillators (VCOs) and Digital/Analog Oscillators (D/Ao). A Voltage Controlled Oscillator (VCO) is an oscillator in which the output frequency is adjusted by varying an input voltage normally in the same range as the output frequency. A D/Ao is an oscillator which uses a combination of digital logic gates and analog components to construct the oscillators.

These oscillators are a very important part of electronic circuits as it provides a reliable source of steady oscillations. The CPPC7L-A3B6-112.0TS provides an excellent performance in multiple applications with the necessary features required for the specific application.

The specific data is subject to PDF, and the above content is for reference