CPPC7L-A5BP-62.5TS

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	50µA
Height - Seated (Max):	0.075" (1.90mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	25mA
Operating Temperature:	-20°C ~ 70°C
Series:	FIPO™ CPP
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	62.5MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Overview of Oscillators

An oscillator is an electronic device that produces an alternating current or voltage waveform on its output with a fundamental frequency determined by the device itself. It can be used in many applications, such as the generation and control of radio and television signals, the generation of waveforms necessary for techniques used in digital signal processing, as well as in the synchronization of multiple electronic devices.

Types of Oscillators

Oscillators can be classified into two major categories: analog and digital. Analog oscillators use analog components, such as capacitors, inductors, and resistors, to generate waveforms with a defined frequency. They can be used in applications requiring relatively low frequencies, such as VHF and UHF television signals, and are commonly used in the audio range. Digital oscillators are designed to produce digital waveforms. They use digital components, such as microprocessors, to generate waveforms with a defined frequency. Digital oscillators are used in applications requiring higher frequencies, such as digital television and radio signals.

CPPC7L-A5BP-62.5TS application field and working principle

The CPPC7L-A5BP-62.5TS is a type of oscillator developed by Panasonic. This oscillator is mainly used in applications requiring the generation of HF signals with a frequency range of 10 MHz to 30 MHz. The CPPC7L-A5BP-62.5TS oscillator works by using a quartz crystal in the resonator circuit. The quartz crystal is made up of two plates cut from a single piece of quartz. These plates are then clamped together and fixed in a metal housing. The quartz crystal acts as a filter, allowing only signals with a frequency close to its resonant frequency to pass, and blocking all other frequencies. The oscillator circuit contains an amplifier, a feedback circuit, and a quartz crystal in the tank circuit. The quartz crystal acts as a frequency selective element, allowing only signals at its resonant frequency to pass. The amplifier increases the power of the signal, while the feedback circuit ensures that the output signal has a fixed frequency. The CPPC7L-A5BP-62.5TS oscillator is designed to provide a stable signal with low noise and wide frequency coverage. It is suitable for use in communications equipment and medical imaging systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description