CPPT7-LT0RT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are among the most common components used in automation and control systems due to their ability to adjust and alter their operating frequency or other parameters. One such programmable oscillator is the CPPT7-LT0RT, which is a programmable cycle time oscillator with integrated frequency and phase modulation capabilities. This oscillator is used in a wide range of applications in industrial and commercial settings, from powering paging systems to providing stabilization and filtering of frequency synthesizers.

What Is CPPT7-LT0RT?

CPPT7-LT0RT is a programmable cycle time oscillator with integrated frequency and phase modulation capabilities. It is a single chip programmable timing solution with clock oscillator capabilities in various different configurations that can be programmed and re-programmed as needed. The output of this oscillator is a clock signal, which can be used to synchronize the timing of various components within an automation system.

The CPPT7-LT0RT oscillator comes in two basic divided configurations, the 7-pin and 11-pin packages. The 7-pin package provides a standard single phase output with a programmable frequency, drive current and cycle time. The 11-pin package provides two separate phase outputs, each with its own programmable frequency, drive current and cycle time. In addition, both packages can be configured to include an external clock source, which provides additional timing flexibility.

CPPT7-LT0RT Application Field and Working Principle

The CPPT7-LT0RT oscillator is used in a wide range of applications where frequency and phase modulation or synchronization is required. These include industrial and commercial paging systems, frequency generators, power supplies, filtering circuits and timing circuits. The oscillator is also used to provide stabilization and filtering of frequency synthesizers.

The way that the CPPT7-LT0RT works is by producing a steady, low-jitter clock signal which is then frequency and phase modulated in order to generate the desired output frequencies and phases. This modulation is accomplished by changing the duty cycle of the output signal, which is then fed back to the oscillator’s control circuitry. The modulation is done in such a way that the output frequency is determined by the cycle time of the signal and the modulation frequency.

The CPPT7-LT0RT is also capable of generating frequencies from 1 Hz to 30 MHz and it can also be used as a pulse width modulator, providing pulse width modulation rates up to 40 MHz. The oscillator also has an internal voltage controlled oscillator, which can be used to generate various output frequencies depending on the voltage applied to the control pin. Additionally, the oscillator can be configured to output low-jitter signals, which are very important when generating complex timing signals.

The CPPT7-LT0RT is a versatile and powerful programmable oscillator that can be used in a wide range of applications. Its ability to generate low-jitter signals and offer frequency and phase modulation make it suitable for many timing and synchronization applications. It is also relatively easy to program and configure, making it a popular choice for many automation and control systems.

The specific data is subject to PDF, and the above content is for reference