CPR0520R00JE31

Through Hole Resistors are a type of electronic component which are used to reduce voltage and current levels, which in turn reduces power dissipation and increases the performance of an electrical circuit. The CPR0520R00JE31 model is a through-hole device, which has applications in electrically noisy environments.

It is constructed from top quality pure carbon film which has precise resistive and temperature coefficients and tight tolerance results for improved efficiency. Its high temperature construction allows it to withstand up to 400°C during soldering. Other advantages over other resistor types include its superior dielectric strength, and it is less prone to noise. This makes it an ideal solution for applications that require high temperature operation such as machine control boards and electronic energy meters.

The working principle of the CPR0520R00JE31 is simple. It is designed to act as a voltage and/or current-limiting resistor which dissipates electric energy. The current and/or voltage is limited by the resistor’s value, which is determined by the amount of resistor material within the device. The resistance of the device is expressed in units of Ohms (Ω).

This resistor is constructed from two ends connected by a winding resistance wire. The resistance wire acts as an anchor, providing the insulation required for the device to operate accurately. When an electrical current is applied to the device, the resistance wire converts it into a low resistance current which is then returned to the source. In essence, the resistance wire acts as a conductor, allowing electricity to travel through it without creating arcing or sparking. Thus, the current flow is limited by the resistor, allowing it to act as a voltage or current-limiting component.

The CPR0520R00JE31 is a through-hole device designed for use in electrically noisy and high-temperature environments. It is an ideal choice for applications such as machine control boards, energy meters and online gaming systems. The resistor offers high-quality construction and superior performance under extreme conditions. It is constructed of top quality pure carbon film which has precise resistive and temperature coefficients and tight tolerance results for improved efficiency. The high temperature construction allows it to withstand up to 400°C during soldering. Additionally, it is less prone to noise, making it ideal for applications that require consistent, reliable performance.