CR11-52-16.0A-R01CV-V

Series:	*
Part Status:	Active
Lead Free Status / RoHS Status:	--
Moisture Sensitivity Level (MSL):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Circuit breakers are devices used to protect electrical circuits from excessive current, short circuits, and other potential problems. Specifically, the CR11-52-16.0A-R01CV-V circuit breaker is designed for residential, commercial and industrial applications and designed to provide safe, reliable, and economical protection against short-circuits. This article will discuss the application field and working principle of the CR11-52-16.0A-R01CV-V circuit breaker.

Application Field of CR11-52-16.0A-R01CV-V Circuit Breakers

The CR11-52-16.0A-R01CV-V circuit breaker is designed for residential, commercial and industrial applications where it is required to provide reliable and cost-effective protection from short circuits. It is designed for use with both AC and DC power systems and is suitable for a wide range of lighting, heating, power supply and other power systems. This circuit breaker can be used in both single phase and three-phase systems and is suitable for use in both indoor and outdoor applications. It is also resistant to weathering and other environmental conditions, making it ideal for use in harsh industrial environments.

Working Principle of CR11-52-16.0A-R01CV-V Circuit Breakers

The working principle of the CR11-52-16.0A-R01CV-V circuit breaker is based on the measurement and detection of over-current events. When an over-current event is detected, such as a short-circuit or an overload, the circuit breaker sends a signal to shut down the circuit immediately, preventing further damage to the power system. The circuit breaker can be set to detect different levels of over-currents, allowing it to be used in a range of applications from residential to industrial.The circuit breaker is designed with an internal mechanism that allows it to quickly and accurately detect and react to both current and temperature conditions. The circuit breaker has an internal mechanism that detects and reacts to temperature changes, as well as changes in current levels and/or fault conditions. This internal mechanism creates a circuit that monitors the current and/or fault conditions, and then sends a signal to the appropriate circuit breaker to trip the circuit and shut off the power.

Conclusion

The CR11-52-16.0A-R01CV-V circuit breaker is a reliable, cost-effective and easy to use protection device designed for residential, commercial and industrial applications. It has an internal mechanism that allows it to accurately detect and react to both current and temperature conditions, making it suitable for a wide range of applications and environments. The working principle of the circuit breaker is based on the measurement and detection of over-current events and can be set to detect different levels of over-currents. This makes it ideal for a wide range of applications from residential to industrial.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description