CR4420S-5

Frequency:	50Hz ~ 400kHz
Package / Case:	Module
Mounting Type:	DIN Rail, Panel
Polarization:	Bidirectional
Operating Temperature:	0°C ~ 60°C
Current - Supply (Max):	45mA
Response Time:	250ms
Voltage - Supply:	24V
Accuracy:	±0.5%
Linearity:	--
Series:	CR4400
Sensitivity:	--
Output:	Ratiometric, 4mA ~ 20mA
Number of Channels:	1
Current - Sensing:	5A
Sensor Type:	Transformer w/Conditioning
For Measuring:	AC
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CR4420S-5 current transducers are one of the most advanced transducers used in a variety of industrial and commercial applications. They are powered by a Common Mode Range (CMR) of 120kVAC and can be used in a wide range of safety applications such as power monitoring, disconnection/disconnection monitoring, current source indication, isolation monitoring, and short-circuit protection. The transducer offers accurate measurement and high reliability performance.CR4420S-5 is a type of current transducer, meaning that it is designed to measure the current in an electrical circuit by converting the current to a proportional electrical signal. This type of transducer can be used in a multitude of industrial and commercial applications where accurate, reliable and efficient current measurement is desired.The main working principle behind the transducer is relatively simple. The transducer consists of a transformer with its primary side connected to the measured current and its secondary side connected to the measurement device. The primary side is designed to reduce the current, usually at a 1:1 ratio, before it is fed into the secondary side. On the secondary side, the current signal is then outputted and can be fed into a current measurement device, such as a voltmeter or current meter, or used to control other systems such as overcurrent protection.The CR4420S-5 comes with a variety of features that make it suitable for a wide range of applications. It has a CMR rating of 120kVAC, meaning that it can measure current with a wide range of AC voltages, making it perfect for powering in complex industrial settings. The signal output of the transducer is also rated at a minimal (e.g. ±2.5% for 0-25 mA loops). This means that the signals emitted from the transducer are very precise and can be used for accurate measurement even in dynamic industrial environments. Additionally, the CR4420S-5 is equipped with over-current protection, short-circuit protection, and isolation monitoring, all of which ensure that the transducer is safe to use even in high-power applications.The CR4420S-5 current transducer is an essential component for many industrial applications. Its measurement capabilities, wide voltage range, and hard-wired protection features make it suitable for a wide range of uses, from power monitoring to short-circuit protection. Due to its ability to convert current to a proportional electrical signal, it can be used in a multitude of applications to provide accurate and reliable measurements of current in an electrical circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description