CRA04P083360RJTD

Resistor Networks, Arrays, can be defined as interconnections of resistors. The CRA04P083360RJTD consists of a single-pole, double-throw (SPDT) switch module and four discrete resistors, connected using a versatile common-centre termination system. This enables the connection of resistors to be configured quickly and easily with virtually no soldering required. The CRA04P083360RJTD is a passive component with a wide range of applications in product design and signal processing.

In terms of application fields, the CRA04P083360RJTD is ideal for Low-pass filter applications, high side current sensing applications, line termination applications, high side current sensing applications and differential amplifier applications. Each of these different applications requires different resistor connection configurations and the CRA04P083360RJTD makes this easy. The system provides a direct connection from one resistor to the other without the need for jumpers or long traces.

CRA04P083360RJTD also has a wide range of working principles. The four separate resistors, R1 to R4, each have an individual termination point on the switchboard. This enables the user to connect all four resistors in a series array or to the same point. As the signals are passed through different elements, a range of characteristics can be created depending on the network configuration. The series configuration is an ideal choice for high pass filter applications as it ensures that only high frequency signals can pass through. This can also be used to block out low frequencies.

The CRA04P083360RJTD also offers a versatile connection for high-side current sensing applications. The higher the voltage, the higher the current that can be measured. This makes it an ideal choice for sensing current from more powerful sources. Similarly, the CRA04P083360RJTD is a great choice for line termination applications thanks to the ability to direct all four resistors to the same single point. This makes it ideal for applications that require precise termination to connect the circuit from source to load.

Finally, the CRA04P083360RJTD is also useful for differential amplifier applications. By connecting two resistors in series with a differential amplifier, the input signal can be measured at the output. This can then be used to control the gain of the amplifier, or to measure the output of a low level signal. The CRA04P083360RJTD provides two independent termination points that allow for these precise connections.

Overall, the CRA04P083360RJTD is an incredibly versatile resistor network, array solution for product designers and signal processors. The system offers a direct connection for the resistors, allowing for various configurations depending on the application. This makes it an ideal choice for high pass filter, high side current sensing, line termination and differential amplifier use cases.