CRB3A4E433JT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are electronic components which combine many resistors together using various techniques. Such arrays allow a wide variety of useful functions to be achieved, including the maintenance of electrical signal levels and the protection of electronic circuitry from damage due to high voltage or current levels. One such device is the CRB3A4E433JT, which can be used to provide temperature compensation for precision current sources, radiation control in space applications, and buffering of controlled-impedance transmission lines.The CRB3A4E433JT is a multi-pin resistor network consisting of four resistors connected in series. Each of these resistors has a tolerance of ±10%, and each is rated for a maximum of 250mA. The device has two taps, each of which can be used to measure the voltage across the adjacent resistors. The total resistance of this device is 71Ω.The working principle of this device is the same as that of any other resistor network. The voltage source is connected to one of the terminals, while the load is connected to the other terminal. The voltage across each resistor is determined by the amount of current that passes through it. The resistance of each resistor is determined by its tolerance, such that the total resistance of the network is always within a predetermined range.When used in temperature compensating applications, the CRB3A4E433JT can provide a reliable and precise current source. The device is able to use the two taps to measure the voltage across its resistors, which in turn can be used to calculate the temperature of the environment. When the temperature is higher than a predetermined value, the resistance of the device decreases, and when the temperature is lower, the resistance of the device increases. This allows the current source to remain consistently at a set level despite environmental fluctuations.The CRB3A4E433JT can also be utilized in radiation control applications. Its two taps allow for precise measurement of the voltage across each of its resistors. By using these measurements, the device can be used to adjust the resistance of the circuit, allowing it to adapt to changes in the environment and maintain a reliable and consistent current source.Finally, the CRB3A4E433JT can also be used in buffering of controlled-impedance transmission lines. In this application, the device is used to control the frequency, amplitude, and phase of the signal being transmitted. This protects the transmitted signal from interference caused by external sources, such as electrical noise or other radio-frequency signals. This allows the signal to travel over long distances without experiencing a significant decrease in signal strength.The CRB3A4E433JT is a versatile device which can be used in a wide variety of applications. Its four resistors, each with a tolerance of ±10%, allow for precise control of voltage and current. This makes it suitable for precision current sources, radiation control in space applications, and buffering of controlled-impedance transmission lines. With its simple and reliable design, the CRB3A4E433JT remains an industry standard for resistor networks.

The specific data is subject to PDF, and the above content is for reference