CS51414EDR8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CS51414EDR8 Application Field and Working Principle

CS51414EDR8, a monolithic synchronous diode rectifier buck converter, is a type of DC-DC switching regulator, which is designed to provide an efficient, cost-effective and convenience solution for a wide range of applications, such as motor control, digital TV, computer storage, solar inverters, LED lighting, vehicle charging and so on. The working principle of the CS51414EDR8 DC-DC switching regulator is based on the theory of buck regulators and is expressed as follows.

Basic Principle of Buck Regulators

The Buck regulator is a type of switching regulator, which converts energy from one electrical circuit to another. This is done by controlling the voltage in order to maintain a certain output voltage. It works by controlling the duty cycle of an active switch (usually a MOSFET) and a passive element, such as an inductor or a capacitor. When the switch is "on", the input voltage is applied to the load. When the switch is "off", the energy stored in the inductor is released to the load. The duty cycle of the switch is the ratio between the "on" time and the "off" time and determines the output voltage.

Operation of CS51414EDR8

The CS51414EDR8 is a dual-phase buck regulator, which integrates two switches and two inductors to reduce the size and cost of the system. It provides an efficient and space-saving solution for applications requiring up to 40V input and 18V output. The CS51414EDR8 is capable of supplying up to 5A of continuous output current, with a switching frequency up to 800kHz.

The CS51414EDR8 features a low-noise operation and an adjustable output voltage. It has an adjustable soft start current limit, an adjustable switching frequency and a thermal protection mechanism. It also features a low input voltage operation, an adjustable phase-shifted full bridge control and four programmable control pins.

The CS51414EDR8 DC-DC switching regulator works by using a pair of switches and two inductors in a buck regulator configuration. When the switch is "on", the input voltage is connected to the load, and as the switch goes "off", the stored energy in the inductors is released to the load. The duty cycle of the switch is adjusted to maintain a certain output voltage. The CS51414EDR8 also has a phase-shifted full bridge control to reduce switching losses and dissipated power, ensuring a much more efficient operation.

Applications

The CS51414EDR8 is ideally suited for applications such as motor control, digital TV, computer storage, solar inverters, LED lighting and automotive charging. It can be used in applications requiring up to 40V input and 18V output. It can also be used in applications where the output voltage is adjustable and/or the switching frequency is adjustable.

The CS51414EDR8 offers a cost-effective and efficient solution for applications requiring low noise operation and thermal protection. It also features low input voltage operation, programmable control pins and adjustable soft start current limit and adjustable switching frequency. The combination of these features make the CS51414EDR8 an ideal solution for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference