CT2002-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Banana and Tip Connectors, often referred to as “jacks” and “plugs,” are the most common type of electrical connection. These connectors use a wide variety of styles and types, ranging from the basic two-wire plug and jack on headphones and telephone amplifiers, to high- voltage plugs, like the CT2002-2 used for industrial grade electrical equipment.

The CT2002-2 is a high-voltage plug used in industrial electrical equipment. It is designed to carry up to 600 volts, with a current rating of 16 amps. It has a wide range of applications, from portable power tools to large industrial motors and generators. The connector consists of two parts- a “pin” side and a “socket” side. The pin side is the part that is inserted into the socket side, and the socket side is the part that accepts the pin. The CT2002-2 has a positive and negative connection on each side, as well as a ground connection on the socket side.

When connecting the CT2002-2 plug, the important safety rule is to always connect the positive and negative ends of the plug in the correct orientation. If the pins are not inserted correctly, the electrical current may not be safely contained and could cause a short circuit. In addition, the plug must be secured tightly to the socket, and the wiring should be checked for any signs of damage or corrosion.

The working principle of the CT2002-2 is based on Ohm’s law. When the proper voltage is applied to the pins on the plug, an electrical current will flow from the positive pin to the negative pin, allowing the current to travel through the connected device. As long as the pins are securely connected and the wiring is in good condition, the amount of current that can be carried by the CT2002-2 is limited only by the size of the plug and the length of the wires.

The CT2002-2 plug is used in a wide range of applications, from consumer electronic equipment to industrial machinery. In consumer electronic equipment, the CT2002-2 is often used for connecting high-power devices such as amplifiers and speakers. In industrial applications, it is used to connect large motors and pumps, and for many other high-power applications. In all cases, it is important to remember that the plug must be connected properly and securely, and wiring should be checked for any signs of damage or corrosion.

The specific data is subject to PDF, and the above content is for reference