CTX01-15472

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, also known as coils, are one of the most basic inductive components. Inductors are composed of components such as copper wire, magnetic cores, and electrodes. The basic function of a fixed inductor is to provide a magnetic field for the passage of energy, allowing the passage of current from one point to another without any significant losses.

CTX01-15472 application field and working principles are commonly used in radio frequency transformer applications to provide increased current to facilitate the transmission of signals. The basic construction of CTX01-15472 includes a metal core, which provides the inductive behavior, and a series of rings wound around it in various directions to increase the mutual inductance. By varying the number of individual wires wound around the core, the inductance, and the number of turns in the winding, these four common parameters can be altered.

Key to the principle of operation of the CTX01-15472 is Faraday\'s Law, which states that the amount of induced voltage in a closed loop circuit is proportional to the rate of change of magnetic flux through a given area enclosed by the loop. Thus when the CTX01-15472 is subjected to alternating current from a radio frequency, the magnetic flux will continually change, inducing voltage in the winding of the inductor."

In practice, the CTX01-15472 is typically used in various impedance matching applications, such as powering an RF device that requires a specific voltage for operation. However, the primary applications of this part are notably low-power RF amplifiers and matching networks. Additionally, depending on the core material, the CTX01-15472 may also be suitable for frequency range-specific applications such as ultra-wideband, short-range wireless communications.

In terms of impedance characteristics, CTX01-15472 is an ideal inductor for low-frequency applications since the rate of change of flux is a direct function of frequency applied to the inductor. Accordingly, the inductor can be adjusted through the number of turns and also by changing the extrusion of the core. Moreover, it can be mounted either directly on the PCB or placed on an extraneous substrate to further reduce noise and improve overall performance.

Overall, the CTX01-15472 is a versatile fixed inductor with distinct characteristics. Its construction and design makes it suitable for a wide range of applications in the radio frequency domain. Additionally, due to its excellent impedance characteristics, it can be easily tuned to suit the required operation frequency for various radio frequency applications.

The specific data is subject to PDF, and the above content is for reference