CW01015R00JE733

Series:	CW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	15 Ohms
Tolerance:	±5%
Power (Watts):	13W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±30ppm/°C
Operating Temperature:	-65°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.375" Dia x 1.781" L (9.52mm x 45.24mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThrough hole resistors are electrical components that are used to limit current flow, adjust signal levels, and divide voltages. They are typically composed of a resistive element, an insulator with a ceramic body, and terminals. They are found in a variety of applications, and the most common type used in through hole technology is the CW01015R00JE733. The CW01015R00JE733 is a common, cost effective type of resistor used in through hole technology. This resistor has a maximum rated power of 0.5 watts, a rated resistance of 0.5Ω, and a tolerance rating of 1%. It is constructed with two gold-plated brass caps, an insulated wire, and a resistive element.The main purpose of the CW01015R00JE733 is to control current flow in an electronic circuit by providing a specific resistance in order to protect other components from over-voltage and damage. The resistor helps to maintain the current flow at the desired level by dissipating any excess voltage energy, thus protecting other components.The CW01015R00JE733 can be used in a wide variety of applications, ranging from motors, amplifiers, and other industrial equipment to consumer electronics and computers. It is often found in small electronic devices, such as cell phones, tablets, and calculators, where its small size and lightweight design make it a good choice for integrated circuits. The CW01015R00JE733 is able to provide a high level of precision due to its accurate power ratings and tolerance ratings. This is essential for a variety of applications, such as medical equipment, where precise current control is essential.In addition to providing precise current control, the CW01015R00JE733 also increases reliability by reducing the chance of component failure, due to its low-power and high-temperature resistance. This makes it ideal for use in a variety of high-temperature environments, such as close to motors, where continuity and reliability are essential.The working principle of the CW01015R00JE733 is based on the electrical resistance principle. The resistor is composed of a resistive element, which is a conductor through which electrical current flows. The current flow through the resistive element creates an electrical potential, which is measured in volts. The resistance of the resistor can then be determined by the current flow through it and the voltage applied. The resistance of a resistor is not affected by the magnitude or direction of the voltage applied. Instead, the resistance value is determined by the geometric size and shape of the resistive element. The resistor\'s external terminals are not affected by the applied voltage, either, since they remain at a fixed, open-circuit potential. In conclusion, the CW01015R00JE733 is a common type of through hole resistor that is ideal for use in a variety of applications, due to its accurate power ratings and tolerance ratings, as well as its low-power and high-temperature resistance. It works on the electrical resistance principle, whereby the current flow through the resistor creates an electrical potential that determines its resistance value. The CW01015R00JE733 is thus an indispensible component for many electronic and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description