Allicdata Part #: | CX-411-P-C05-ND |
Manufacturer Part#: |
CX-411-P-C05 |
Price: | $ 64.30 |
Product Category: | Sensors, Transducers |
Manufacturer: | Panasonic Industrial Automation Sales |
Short Description: | SENSOR PHOTO 10M 12-24VDC PNP |
More Detail: | N/A |
DataSheet: | CX-411-P-C05 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 58.45140 |
Series: | CX-400 |
Part Status: | Active |
Sensing Method: | Through-Beam |
Sensing Distance: | 32.80' (10m) |
Voltage - Supply: | 12 V ~ 24 V |
Response Time: | 1ms |
Output Configuration: | PNP - Open Collector |
Connection Method: | Cable |
Ingress Protection: | IP67 |
Cable Length: | 19.5" (50cm) |
Light Source: | Red LED |
Adjustment Type: | -- |
Operating Temperature: | -25°C ~ 55°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical Sensors, such as Photoelectric, Industrial, are a type of sensing device used to detect the presence of an object or a change in an environment. One of the most popular optical sensors is the CX-411-P-C05. The CX-411-P-C05 is a digital, ultra-low power optical sensor which uses a transimpedance amplifier to provide an output signal. This article will discuss the application field and working principle of the CX-411-P-C05.
The CX-411-P-C05 is mainly used in light detecting and ranging (LIDAR) applications. With its high photoresponsitivity and low power consumption, it can detect and measure the distance between two objects with extreme precision and accuracy. It is especially designed for surveillance and obstacle detection applications, where it can be used to detect objects in low-light environments.
The working principle of the CX-411-P-C05 is based on the transimpedance amplifier. It uses a photodetector to convert light changes into electrical signals. The electrical signals are then amplified and converted into an output signal. The output signal is then used to detect the presence of an object or a change in an environment.
The photodetector used in the CX-411-P-C05 is a wide-angle linear diode array. This diode array is designed to provide high responsivity and wide detection angle. The photodetector is sensitive to both visible and near-infrared light, and can detect changes in its environment over a wide range of wavelengths. This wide detection angle and wide wavelength range gives the CX-411-P-C05 higher accuracy and faster response times than other optical sensors.
The transimpedance amplifier used in the CX-411-P-C05 is a high-speed, low-noise amplifier. This amplifier amplifies the electrical signals generated by the photodetector and converts them into an output signal. The output signal is then used to detect the presence of an object or a change in an environment.
The CX-411-P-C05 is a cost-effective and reliable optical sensor. It has high photoresponsitivity, wide detection angle, low power consumption, and high accuracy. It is an ideal choice for light detecting and ranging applications, such as surveillance and obstacle detection, where it can be used to detect objects in low-light environments with extreme precision and accuracy.
In conclusion, the CX-411-P-C05 is a digital, ultra-low power optical sensor which uses a transimpedance amplifier to provide an output signal. Its application field is mainly in light detecting and ranging (LIDAR) applications, where it can be used to detect objects in low-light environments with extreme precision and accuracy. Its working principle involves a photodetector, which converts light changes into electrical signals, and a transimpedance amplifier, which amplifies the electrical signals and converts them into an output signal. The CX-411-P-C05 is cost-effective, reliable, and an ideal choice for light detecting and ranging applications.
The specific data is subject to PDF, and the above content is for reference
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM