Allicdata Part #: | CX-413-P-C05-ND |
Manufacturer Part#: |
CX-413-P-C05 |
Price: | $ 64.30 |
Product Category: | Sensors, Transducers |
Manufacturer: | Panasonic Industrial Automation Sales |
Short Description: | SENSOR PHOTO 15M 12-24VDC PNP |
More Detail: | N/A |
DataSheet: | CX-413-P-C05 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 58.45140 |
Series: | CX-400 |
Part Status: | Active |
Sensing Method: | Through-Beam |
Sensing Distance: | 30m |
Voltage - Supply: | 12 V ~ 24 V |
Response Time: | 2ms |
Output Configuration: | PNP - Open Collector |
Connection Method: | Cable |
Ingress Protection: | IP67 |
Cable Length: | 19.5" (50cm) |
Light Source: | Infrared |
Adjustment Type: | -- |
Operating Temperature: | -25°C ~ 55°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical Sensors are a type of sensor device that uses light energy to detect a physical condition or measure an environmental parameter. CX-413-P-C05 is an example of such an Optical Sensor. It is designed to detect light, or more specifically, a change in its wavelength. This enables it to be used in a range of different applications in both the industrial and research sectors.
The CX-413-P-C05 is a photoelectric sensor, which means it involves the generation and detection of light signals. It works using the principle of reflex-optic. This optic principle is based on the change of light intensity and the refraction effect of the light source when it encounters a reflecting surface.
The CX-413-P-C05 is comprised of a transmitter and receiver, both of which are equipped with optical filters. The transmitted light signal passes from the transmitter to the receiver, usually via an optical fiber or a glass rod. When the transmitted light passes through the filter, it is split into two components, the reflected and the absorbed light.
The reflected light is then detected by the receiver, which is also equipped with an optical filter. The received signal is then amplified and measured by an output device. This output device can be an analog or digital processor, depending on the specific application. The output from the receiver is then used to control or measure the light intensity or position of the given object.
The CX-413-P-C05 is used in a variety of industrial applications. It is used in automotive and medical industries to detect changes in light intensity and position of objects. It is also used in the aerospace, agriculture, and telecommunications industries. In the automotive industry, the CX-413-P-C05 is used in adaptive cruise control systems. In the medical industry, it is used for medical device calibration. In the aerospace industry, it is used in both situational awareness and navigation systems. In the agriculture industry, it is used in controlling irrigation systems, and in the telecommunications industry, it is used in cell phone base station systems.
The CX-413-P-C05 is a highly reliable and cost-effective solution for monitoring light intensity or position. It is quick and easy to configure and simple to install and operate. It is also very flexible as it can be mounted or suspended from ceilings or walls. Additionally, the CX-413-P-C05 is resistant to corrosion and has a wide operating temperature range.
In summary, the CX-413-P-C05 is an optical sensor that uses the reflex-optic principle to detect light intensity or position. It is used in various industrial and research applications and is highly reliable and cost-effective. It is easy to install and configure and resistant to corrosion and a wide operating temperature range.
The specific data is subject to PDF, and the above content is for reference
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM