CX-493-C05-Y Sensors, Transducers |
|
Allicdata Part #: | CX-493-C05-Y-ND |
Manufacturer Part#: |
CX-493-C05-Y |
Price: | $ 59.66 |
Product Category: | Sensors, Transducers |
Manufacturer: | Panasonic Industrial Automation Sales |
Short Description: | SENSOR PHOTO 5M 12-24VDC NPN |
More Detail: | N/A |
DataSheet: | CX-493-C05-Y Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 54.23670 |
Series: | CX-400 |
Part Status: | Active |
Sensing Method: | Retroreflective |
Sensing Distance: | 16.40' (5m) |
Voltage - Supply: | 12 V ~ 24 V |
Response Time: | 1ms |
Output Configuration: | PNP - Open Collector |
Connection Method: | Cable |
Ingress Protection: | IP67 |
Cable Length: | 19.5" (50cm) |
Light Source: | Red LED |
Adjustment Type: | -- |
Operating Temperature: | -25°C ~ 55°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors are a type of transducer which converts light intensity into an electrical signal. They have been widely used in industrial, medical, and scientific applications. The CX-493-C05-Y is an optical sensor specifically designed for industrial use. It is able to detect various forms of light, including infrared and ultraviolet, and can be used for a variety of industrial applications.
The CX-493-C05-Y optical sensor is based on the light-sensitive semiconductor principle. It is essentially a two-terminal device, with one terminal receiving light energy and the other developing a voltage as a result. When light energy is incident on the light-sensitive semiconductor, it is absorbed and converted into electrical energy. This electrical energy is then used to power the sensor and its output signals.
The CX-493-C05-Y can detect a wide range of light frequencies, including infrared, ultraviolet and visible light. In addition, this sensor can be used for a variety of industrial applications, such as motion detection, depth sensing, and level and temperature detection. These applications make use of the sensor’s ability to measure changes in light intensity. For example, the sensor can be used to detect motion in a room and to measure the temperature of an object.
The CX-493-C05-Y is relatively easy to install, and its operation is very simple. It can be powered by a wide range of power sources, including batteries, solar cells, and AC power supplies. It features automatic gain control, which allows it to detect light sources without overloading its circuits. In addition, the sensor has a wide dynamic range, allowing it to accurately detect light levels over a large range of intensity.
The CX-493-C05-Y is an ideal solution for industrial applications. Its light-sensitive semiconductor principle and wide detection range make it suitable for a range of applications. It can be used for monitoring movement and for detecting temperature and pressure. In addition, the sensor’s low power requirement and high sensitivity make it a reliable and cost-effective solution for industrial and commercial applications.
The specific data is subject to PDF, and the above content is for reference
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM