| Allicdata Part #: | 1110-1420-ND |
| Manufacturer Part#: |
CY-111VA-Z |
| Price: | $ 47.15 |
| Product Category: | Sensors, Transducers |
| Manufacturer: | Panasonic Industrial Automation Sales |
| Short Description: | SENSOR PHOTO NPN 15M 12-24V |
| More Detail: | N/A |
| DataSheet: |  CY-111VA-Z Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | $ 42.85890 |
| 5 +: | $ 40.71820 |
| 10 +: | $ 37.50390 |
| 25 +: | $ 33.21770 |
| 50 +: | $ 32.14610 |
| 100 +: | $ 31.07450 |
| Series: | CY-100 |
| Part Status: | Active |
| Sensing Method: | Through-Beam |
| Sensing Distance: | 590.551" (15m) |
| Voltage - Supply: | 12 V ~ 24 V |
| Response Time: | 1ms |
| Output Configuration: | NPN - Open Collector |
| Connection Method: | Connector, M12, 4POS |
| Ingress Protection: | IP67 |
| Cable Length: | -- |
| Light Source: | Infrared |
| Adjustment Type: | -- |
| Operating Temperature: | -25°C ~ 55°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors are used to detect changes in the physical world, and have wide application in industrial, medical, commercial, and scientific fields. The CY-111VA-Z is a photoelectric sensor that is used to detect objects or conditions in industrial settings. It is used in equipment such as escalators, conveyors, and other machinery. The CY-111VA-Z consists of a light emitting diode (LED), a light detecting diode (LDD), and a photodiode (PD). The LED emits a beam of light which is then reflected off an object or condition that is to be detected. The LDD receives the reflected light and then sends an electrical signal to the PD, which converts the signal into an electrical signal. The output of the PD can then act as an enable signal for a control circuit, or provide information to a logic circuit.
The CY-111VA-Z is typically installed in the machinery that is being monitored. First, the LED emits a beam of light which reflects off a target located in the mechanical system. The reflected light is then received by the LDD. The LDD is connected to the PD which converts the electrical signal into an output signal. This signal can then be used to enable a control circuit or provide information to a logic circuit. The CY-111VA-Z can be enabled or disabled from the user\'s side, allowing the user to select the system to operate in either a normal or inspection mode.
The CY-111VA-Z is also equipped with an automatic reset feature, which allows the system to reset itself after a certain amount of time. This allows the system to be used in areas where frequent resetting is needed, such as in medical or military applications. The CY-111VA-Z also has the ability to adjust its sensitivity. This allows the PLC to adjust the intensity of the output signal based on the environment.
The CY-111VA-Z is a reliable sensing solution that is used in many applications. Its wide range of applications makes it suitable for a variety of settings. Its ability to regulate its sensitivity makes it ideal for environments where different levels of light are encountered. It is designed to be simple to install and use, and is made from durable components which are designed to withstand harsh environments.
The specific data is subject to PDF, and the above content is for reference
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM