D4S20P-400A5-B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors (RF) are a type of connector used in communication and signal applications, and the D4S20P-400A5-B is a specific example of this type of equipment. The D4S20P-400A5-B is used to connect coaxial cables, allowing for the transmission of both radio-frequency (RF) signals and electrical power. This type of connector can be found in a wide variety of fields, from telecommunications and consumer electronics, to antenna and satellite applications.

The D4S20P-400A5-B consists of a male and female connector, designed to be mated together. The male connector has an inner contact and an outer conductor that is typically connected to a ground line. The female connector has a hollow contact that mates with the inner contact of the male connector, and two outer pins that mate with the outer conductor of the male connector. The inner diameter of the female connector is usually slightly larger than that of the male connector, allowing for ease of mating. The material used to make these connectors is typically brass or copper.

In terms of operation, the D4S20P-400A5-B works by using an RF signal to heat the inner conductor of the male connector. As this conductor heats up, the center pin expands and makes contact with the inner conductor of the female connector, creating a connection between the two. This connection is maintained through both the male and female connectors, allowing the signal to be successfully transmitted from one end to the other. In addition, the D4S20P-400A5-B can also be used to carry an electrical power supply, with the same principle being used to establish the connection between the two connectors.

The D4S20P-400A5-B is a key component in a wide range of applications, including telecommunications, consumer electronics, and antenna and satellite applications. In telecommunications, the D4S20P-400A5-B is often used in the transmission of radio frequency signals, such as in cellular base stations and satellite communication systems. It is the same principle used in consumer electronics, where the connector is used to send audio and video signals between devices. In antenna systems, the D4S20P-400A5-B is used to direct the transmission and reception of communications signals, ensuring that the signals travel in the desired direction. Finally, the D4S20P-400A5-B is also used in satellite applications, where it is used to connect the satellite to the antenna system, ensuring that the signals are transmitted and received correctly.

The D4S20P-400A5-B is a widely adopted coaxial connector used in communication and signal applications. It is a key component in a range of fields including telecommunications, consumer electronics, and antenna and satellite applications. The D4S20P-400A5-B works by using an RF signal to heat the inner conductor of the male connector, which causes the male and female connectors to mate and create a connection. The D4S20P-400A5-B is typically made of brass or copper and is used to transfer both radio-frequency (RF) signals and electrical power.

The specific data is subject to PDF, and the above content is for reference