Allicdata Part #: | Z1671-ND |
Manufacturer Part#: |
D6F-01A1-110 |
Price: | $ 91.32 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | SENSOR AIR FLOW TYPE 0-1LTR PLST |
More Detail: | Air Flow Sensor 0 ~ 0.264 GPM (0 ~ 1 LPM) 0.34" (8... |
DataSheet: | D6F-01A1-110 Datasheet/PDF |
Quantity: | 66 |
1 +: | $ 83.00880 |
5 +: | $ 78.63800 |
10 +: | $ 69.90040 |
25 +: | $ 65.53130 |
50 +: | $ 63.34710 |
100 +: | $ 61.16290 |
Series: | D6F |
Part Status: | Active |
Sensing Range: | 0 ~ 0.264 GPM (0 ~ 1 LPM) |
Flow Sensor Type: | Air |
Voltage - Input: | 10.8 V ~ 26.4 V |
Port Size: | 0.34" (8.6mm) |
Switch Function/Rating: | -- |
Material - Body: | PPS |
Operating Temperature: | -10°C ~ 60°C (TA) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Flow sensors, also known as flow meters, are commonly used to measure the rate of fluid or gas passing through various points in a system. The D6F-01A1-110 is a type of flow sensor used to measure the volumetric rate of liquid water passing through pipes. This flow sensor uses technology based on the thermal property of fluid flow.
The D6F-01A1-110 flow sensor has a wide range of application fields. It is commonly used in industrial water piping systems for measuring the rate of flow, as well as inflow/outflow systems of steam and hot water. In addition, it is an ideal choice for monitoring the levels of water in swimming pools, water pipes, and so on. It is also suitable for gas applications in which small amounts of gas must be measured quickly and accurately.
The working principle of the D6F-01A1-110 flow sensor is based on the thermal property of fluid flow. The sensor is equipped with two heating elements — one is located upstream of the flow and the other is located downstream of the flow. The upstream heating element is for generating heat, and the downstream one is for measuring the temperature change as the fluid passes by the two elements.
When the upstream element heats up the fluid, its temperature rises. This temperature change is then measured by the downstream element. By measuring the time it takes for the temperature to drop after the upstream element is turned off, the flow rate of the fluid can be calculated. This data is then sent to the controller for analysis.
In addition, the D6F-01A1-110 flow sensor is also equipped with a microcontroller to record the various parameters related to the flow of the fluid. This microcontroller enables the ability to adjust the flow rate according to the needs of the application. Moreover, the sensor also has a control circuit to control the operation of the sensor by sending pulses to the upstream and downstream elements.
The D6F-01A1-110 flow sensor is an ideal choice for measuring the rate of fluid flow. It can accurately measure the volumetric rate of liquid water passing through pipes quickly and reliably. Thanks to its microcontroller, it is possible to adjust the flow rate according to the needs of the application, thus making it suitable for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
MEMS FLOW AND PRESSURE MODULEGas Flow Se...
SENSOR AIRFLOW 1.0 SLPMAir Flow Sensor 1...
FLOW SWITCH--MR-W1-PFlow Sensor 1 ~ 30 L...
G5/4" WATER FLOW SENSORLiquid Flow Senso...
G1" WATER FLOW SENSORLiquid Flow Sensor ...
FLOW SENSOR MEMSGas Flow Sensor 0 ~ 2 LP...