Allicdata Part #: | Z2863-ND |
Manufacturer Part#: |
D6F-10A6-000 |
Price: | $ 150.32 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | AIRFLOW SENSOR MEMS 10L/MIN |
More Detail: | Air Flow Sensor 0 ~ 10 LPM 1/4", 0.25" (6.35mm) RC... |
DataSheet: | D6F-10A6-000 Datasheet/PDF |
Quantity: | 38 |
1 +: | $ 136.65300 |
5 +: | $ 128.11200 |
10 +: | $ 123.84200 |
25 +: | $ 119.57100 |
50 +: | $ 117.43600 |
Series: | D6F |
Part Status: | Active |
Sensing Range: | 0 ~ 10 LPM |
Flow Sensor Type: | Air |
Voltage - Input: | 10.8 V ~ 26.4 V |
Port Size: | 1/4", 0.25" (6.35mm) RC |
Switch Function/Rating: | -- |
Material - Body: | Thermoplastic resin / Aluminum alloy |
Operating Temperature: | -10°C ~ 60°C (TA) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
The D6F-10A6-000 is a flow sensor that utilizes a flow-targeted miniature thermal anemometer unit to detect air velocity within a confined space. Its sensing unit consists of a semiconductor element and a temperature resistance component. This combination allows the D6F-10A6-000 to accurately measure air velocity, and provide feedback of wind speed and direction.
Application Field
The D6F-10A6-000 is a multipurpose, low cost, ultrasonic-based flow sensor, which can be used for a variety of environmental monitoring, control and energy efficiency applications. These applications include measurement of air velocity, temperature and humidity, exhaust gas flow, flow and pressure measurement, and flow and volumetric flowmeters.
The D6F-10A6-000 is widely used in the field of industrial and automotive engineering, where it is used for monitoring of the production process. It is also widely employed in the HVAC industry in both commercial and residential applications. This sensor can provide accurate and real-time feedback required to maintain the desired temperature.
In addition, the D6F-10A6-000 is used for gas and liquid flow measurement. It can be employed for air flow in the exhaust gas streams of industries such as energy production, petrochemicals, or any other where high-speed and stable flow is desired.
Working Principle
The working principle of the D6F-10A6-000 is based on the effects of thermal anemometer, which is an established technique of measuring the fractional velocity in fluids. The thermal anemometer uses changes in thermal power within an array of tiny, insulated thermistor elements to measure the amount of heat transfer in a given air flow.
The sensing elements of the D6F-10A6-000 are mounted on a central axis. As the air passes through the thermistors, a voltage is induced across them, which is proportional to the air velocity. This voltage is monitored, and the readings are converted into measured air velocity.
The D6F-10A6-000 is designed to work in a wide range of temperature and humidity, from near zero to up to 120 degrees Fahrenheit. It is also designed to process data at high speed, with readings taken every 0.2 seconds. As a result, the D6F-10A6-000 produces reliable and accurate measurements.
Conclusion
The D6F-10A6-000 is a reliable and economical flow sensor, suitable for a variety of industrial and automotive applications. Its sensing elements are designed to operate in a wide range of temperatures and to process data at high speed. As a result, it provides accurate and real-time feedback of air velocity and direction.
The specific data is subject to PDF, and the above content is for reference
MEMS FLOW AND PRESSURE MODULEGas Flow Se...
SENSOR AIRFLOW 1.0 SLPMAir Flow Sensor 1...
FLOW SWITCH--MR-W1-PFlow Sensor 1 ~ 30 L...
G5/4" WATER FLOW SENSORLiquid Flow Senso...
G1" WATER FLOW SENSORLiquid Flow Sensor ...
FLOW SENSOR MEMSGas Flow Sensor 0 ~ 2 LP...