D6F-10A7D-000-0

Flow sensors are mainly used in industry for measuring the flow rate or quantity of liquids or gases flowing through pipelines. They may also be used to detect the presence or absence of flowing media. The D6F-10A7D-000-0 flow sensor is an example of a flow sensor characterized by its sturdy structure, wide-range measuring capability, and simple installation.

The D6F-10A7D-000-0 flow sensor measures the flow quantity of liquid, gas or steam in a closed system. It is suitable for measuring mass flow rate and volumetric flow rate. It has good repeatability and long-term stability. The measurement range is wide and the minimum measurable value is 0.1 mL/min. The maximum number of liquid measurements is 20000 mL. Its measuring accuracy is the same for both fluid and gas.

The D6F-10A7D-000-0 flow sensor works based on the principle of venturi effect. It has a stainless steel structure and consists of a main unit, a measuring tube, a throttle and a pressure tap. The main unit contains a differential amplifier, a control circuit, a solenoid valve and a temperature compensation circuit. The throttle is composed of a shaping nozzle and a separated nozzle, which can efficiently reduce the overall pressure loss. The pressure tap is provided at the inlet of the nozzle so that the pressure difference before and after the nozzle can be measured.

When the measured medium flows through the nozzle, the flow rate will increase and the pressure will decrease in proportion according to the Venturi effect. The pressure is then detected by the pressure tap and the temperature is automatically adjusted by the temperature compensation circuit. This information will be transmitted to the control circuit and the differential amplifier will calculate the signal and convert it into an electrical signal. This electrical signal will be transmitted to the solenoid valve on the main unit, which will control the air flow rate to maintain the same pressure gradient. Finally, the value of the flow rate is displayed.

The D6F-10A7D-000-0 flow sensor has a wide application field due to its wide range of measuring capabilities and its stable performance. It can be widely used in systems that require precise flow measurements such as the measurement of air flow rate, gas flow rate and liquid flow rate. It is also suitable for measuring the flow rate in industrial production processes such as water supply systems, heat exchangers, combustible gas supply systems, and other systems.

In conclusion, the D6F-10A7D-000-0 flow sensor is a practical solution for flow measurement. It is suitable for different media and provides accurate and reliable measurements. Its installation is easy and its performance is consistent. Owing to its simple design and wide range of measuring capabilities, the D6F-10A7D-000-0 flow sensor is an ideal choice for a range of industrial applications.