Allicdata Part #: | D6F-70A7-000-ND |
Manufacturer Part#: |
D6F-70A7-000 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | FLOW SENSOR MEMS |
More Detail: | Air Flow Sensor Female, 0.157" (4mm) |
DataSheet: | D6F-70A7-000 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | D6F |
Part Status: | Obsolete |
Sensing Range: | -- |
Flow Sensor Type: | Air |
Voltage - Input: | 10.8 ~ 26.4 V |
Port Size: | Female, 0.157" (4mm) |
Switch Function/Rating: | -- |
Material - Body: | -- |
Operating Temperature: | -10°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Flow sensors are used for the purpose of measuring the linear, nonlinear, volumetric, or mass flow rate of a liquid or a gas. Flow sensors are widely used in a variety of industries, especially those which have a need for higher precision in their measurements. The D6F-70A7-000 is one such flow sensor, and its application field and working principles will be discussed in this article.
The D6F-70A7-000 is a flow sensor mainly used for the purpose of measuring air or gas flow, and is mainly employed in the fields of medical, robotic, and automotive engineering. Specifically, the D6F-70A7-000 is mainly employed in medical engineering, such as air compressor outputs, air supply for respirators, and ventilation systems. It is also used as a motion control sensor for industrial or robot robotic applications, such as paint and powder coating processes. Lastly, the D6F-70A7-000 is used in automotive engineering, mainly for the purpose of measuring exhaust flow and fueling systems in vehicles.
The D6F-70A7-000 is a thermal flow sensor, which means it works on the principles of hot-wire or hot-film sensors. These sensors detect a change in temperature to calculate and measure a flow rate. Basically, the D6F-70A7-000 functions by using wattage to heat a predetermined length of wire, typically platinum, or a thin film of heat-resistant material. The heated wire or film is exposed to the flow of air or gas, and the change in temperature is then detected by the sensor. This change in temperature can then be used to calculate the flow rate.
The D6F-70A7-000 is an analog type sensor, with a range of 0 to 10 volts output. It is also a highly durable and reliable sensor, which offers a wide variety of features and functions. One of these features is the zero-point adjustment, which allows for the calibration of zero-flow rates. Additionally, the D6F-70A7-000 is capable of temperature compensation, which helps to ensure that accurate readings are obtained under a variety of environmental conditions.
The D6F-70A7-000 is a highly versatile and reliable flow sensor, and is suitable for a variety of applications. As mentioned earlier, it is mainly used for the purpose of measuring air or gas flow in medical, robotic, and automotive engineering, but it can also be used in other fields such as HVAC systems, and in the food and beverage industry. Given its features and functions, the D6F-70A7-000 is considered to be a highly optimal flow sensor for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
MEMS FLOW AND PRESSURE MODULEGas Flow Se...
SENSOR AIRFLOW 1.0 SLPMAir Flow Sensor 1...
FLOW SWITCH--MR-W1-PFlow Sensor 1 ~ 30 L...
G5/4" WATER FLOW SENSORLiquid Flow Senso...
G1" WATER FLOW SENSORLiquid Flow Sensor ...
FLOW SENSOR MEMSGas Flow Sensor 0 ~ 2 LP...