Allicdata Part #: | Z2631-ND |
Manufacturer Part#: |
D6F-W01A1 |
Price: | $ 61.24 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | AIRFLOW SENSOR 0-1 M/SEC 12/24V |
More Detail: | Air Flow Sensor 0 ~ 1 m/s 0.10" x 0.20" (2.6mm x 5... |
DataSheet: | D6F-W01A1 Datasheet/PDF |
Quantity: | 0 |
1 +: | $ 55.67310 |
5 +: | $ 52.88980 |
10 +: | $ 48.71410 |
25 +: | $ 43.14690 |
50 +: | $ 41.75510 |
100 +: | $ 40.36330 |
Series: | D6F |
Part Status: | Active |
Sensing Range: | 0 ~ 1 m/s |
Flow Sensor Type: | Air |
Voltage - Input: | 10.8 V ~ 26.4 V |
Port Size: | 0.10" x 0.20" (2.6mm x 5mm) |
Switch Function/Rating: | -- |
Material - Body: | PPS |
Operating Temperature: | -10°C ~ 60°C (TA) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Flow sensors are widely used in a range of industries and applications. The D6F-W01A1 Flow Sensor is a specifically designed and highly sensitive thermal mass flow sensor that is suitable for a variety of applications in the industrial and consumer markets. In this article, we will be discussing the application fields and working principles of the D6F-W01A1 Flow Sensor.
Application Field
The D6F-W01A1 Flow Sensor is designed to measure the mass or volume rate of fluid flow of gases and liquids. It is most often used in air conditioning systems, industrial process control systems and medical equipment. It has been proven to be reliable and accurate, with very little drift over time. This makes it highly suitable for applications that require precise measurements.
The D6F-W01A1 Flow Sensor is also used in aircraft systems to measure the flow rate of fuel or oxygen, and in process control applications such as oxygen plants. Furthermore, its use is widespread in the medical industry, as it can accurately measure the flow rate of oxygen or other medical gases.
Working Principle
The D6F-W01A1 Flow Sensor is based on a thermal mass flow measurement principle. This device has an internal heater element and a temperature sensor. The temperature sensor is used to measure the temperature difference between the reference temperature and the heated element. When a flow of the fluid is introduced to the Flow Sensor, the fluid absorbs the heat from the element, resulting in a decrease in temperature.
To accurately measure the flow rate of the fluid, the Flow Sensor uses a differential temperature, which is the difference between the temperature of the heated element and the reference temperature. The differential temperature is then used to calculate the flow rate of the fluid. The accuracy of this calculation is dependent on the accuracy of the temperature readings.
The D6F-W01A1 Flow Sensor is a highly sensitive device and is capable of accurately measuring flow rates in a range of 1 mL/min to 20 l/min. Furthermore, it is able to measure a wide range of pressures, temperatures, and viscosities. This makes it suitable for a variety of applications in industries such as medical, aviation, and industrial process control.
Conclusion
The D6F-W01A1 Flow Sensor is a highly advanced and sensitive device that is suitable for many different industries and applications. It is based on a thermal mass flow measurement principle, and is able to accurately measure the flow rate of gas and liquid within a range of 1 mL/min to 20 l/min. Its high sensitivity and broad range make it an ideal choice for a variety of industries, including the medical, aviation, and industrial process control.
The specific data is subject to PDF, and the above content is for reference
MEMS FLOW AND PRESSURE MODULEGas Flow Se...
SENSOR AIRFLOW 1.0 SLPMAir Flow Sensor 1...
FLOW SWITCH--MR-W1-PFlow Sensor 1 ~ 30 L...
G5/4" WATER FLOW SENSORLiquid Flow Senso...
G1" WATER FLOW SENSORLiquid Flow Sensor ...
FLOW SENSOR MEMSGas Flow Sensor 0 ~ 2 LP...