Allicdata Part #: | 596-1007-ND |
Manufacturer Part#: |
DAK-68A |
Price: | $ 20.28 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Power Integrations |
Short Description: | KIT DESIGN ACCELERATOR POE CONV |
More Detail: | DPA423, DPA424, DPA425 DPA-Switch® Special Purpose... |
DataSheet: | DAK-68A Datasheet/PDF |
Quantity: | 11 |
1 +: | $ 18.25110 |
Series: | DPA-Switch® |
Part Status: | Active |
Main Purpose: | Special Purpose DC/DC, Power Over Ethernet |
Outputs and Type: | 1, Non-Isolated |
Power - Output: | 6.6W |
Voltage - Output: | 3.3V |
Current - Output: | 2A |
Voltage - Input: | 36 V ~ 57 V |
Regulator Topology: | Flyback |
Frequency - Switching: | 400kHz |
Board Type: | Bare (Unpopulated) and Fully Populated |
Supplied Contents: | Board(s) |
Utilized IC / Part: | DPA423, DPA424, DPA425 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The DAK-68A is an evaluation board that is used for both DC/DC and AC/DC (Off-Line) switching regulators (SMPS). This evaluation board has a wide range of applications, from voltage and current regulation to single-stage AC/DC converters.
The DAK-68A is equipped with a Schottky Rectifier and Bridge Rectifier. The Schottky Rectifier is designed to convert alternating current from the utility power supply into a continuous direct current that can be used to power the board. The Bridge Rectifier is designed to regulate the voltage and current levels to ensure a stable power supply to the board.
The DAK-68A also features an adjustable voltage regulator and current limiting circuit. The voltage regulator is used to regulate the output voltage level and is adjustable over a range of 0V to 24V. The current limiting circuit allows the board to be used for either constant voltage or constant current power supply applications. This feature provides the user with a greater level of flexibility.
DC/DC converters are commonly used to convert a DC voltage into a lower AC voltage for use in a range of applications. The DAK-68A features a Pulse Width Modulation (PWM) signal generator, which is used to control the on-off duty cycle of the power supply in order to achieve the desired output voltage. The frequency of the PWM signal is adjustable from 0 Hz to 400 Khz.
The DAK-68A also features an on-board lamination mapper. This feature allows the user to generate a mapping of the voltage and current of the power supply at different duty cycles. This mapping can be further used in order to accurately control the voltage and current levels of the board.
The DAK-68A is also capable of supporting a range of single-stage AC/DC converters. This feature can be used to convert AC power from the utility power supply into a lower voltage AC for use in a range of applications. The board can provide up to 40V of AC power.
In summary, the DAK-68A evaluation board is a versatile tool for both DC/DC and single-stage AC/DC applications. It features a Schottky Rectifier and Bridge Rectifier, an adjustable voltage regulator and current limiting circuit, a PWM signal generator, and an on-board lamination mapper. The board is also capable of supporting a range of single-stage AC/DC converters. The DAK-68A is an excellent tool for evaluating and testing both DC/DC and AC/DC converters.
The specific data is subject to PDF, and the above content is for reference
EVAL KIT FOR ACT4060ASH-TACT4060A - DC/D...
BOARD EVAL OFFLINE CTLR NCP1337ANCP1337 ...
BOARD EVAL POE FOR SI3402Si3402 - Specia...
EVAL BOARD FOR DCM24AP150T320A50DCM24AP1...
BOARD EVALUATION LM3670MF-1.5LM3670 - DC...
EVAL BOARD QUASI RES 15WVIPER35HD - AC/D...