DC1067A-B

Series:	--
Part Status:	Active
Number of A/D Converters:	1
Number of Bits:	16
Sampling Rate (Per Second):	30
Data Interface:	SPI
Input Range:	--
Power (Typ) @ Conditions:	--
Utilized IC / Part:	LTC2450-1
Supplied Contents:	Board(s)
Base Part Number:	LTC2450

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The DC1067A-B evaluation board is an Analog to Digital Converters (ADCs) used for high resolution precision signal conditioning. It is a completely integrated system to quickly evaluate the temperature, position, speed and pressure applications based on voltage signals. It is also used to convert analog signals from low to high voltage levels into digital form. The board is based on an on-board 12 bit ADC which features a programmable gain amplifier, attenuator, reference voltage and voltage divider.

Application Field

The DC1067A-B is a versatile device that can be used in many different applications. Its wide range of features makes it suitable for applications such as temperature measurement, pressure measurement, atmospheric humidity, industrial process control, data acquisition and medical instrumentation. The ADC is useful for controlling a wide range of sensors that require a high level of accuracy. In instrumentation applications, the ADC\'s programmable gain amplifier and attenuator can be used to amplify and attenuate input signals, depending on the range and level of accuracy required. The programmable reference voltage and voltage divider can also be used to set the ADC’s resolution and accuracy. The DC1067A-B can be used in process control and medical instruments. Its features enable it to accurately read and record signals over a wide range of conditions without the need for manual updates or calibration.

Working Principle

The DC1067A-B is based on a 12-bit ADC. The reference voltage for the ADC is supplied by an on-board reference, which can be programmed using an external voltage source or an internal adjuster. The input signal is first amplified or attenuated using an on-board programmable gain amplifier (PGA) and attenuator, depending on the required level of gain and precision. The signal is then filtered and conditioned by an on-board analogue-to-digital converter (ADC).The ADC converts the analogue input signal to a digital format by using an internal counter to measure the number of clock cycles required to reach a certain threshold voltage. This digital data is then converted back to analogue form before being sent out from the device as an output signal.

Conclusion

The DC1067A-B evaluation board is a high accuracy, precision signal conditioning ADC. It offers a programmable gain amplifier, attenuator, reference voltage and voltage divider to control the range and precision of the ADC’s output. Its features make it suitable for a number of instrumentation and process control applications, including temperature measurement, pressure measurement, atmospheric humidity, industrial process control and medical instrumentation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description