DCE-ANT2314-RTNC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF antennas are devices used to capture radio frequency signals. The particular type of RF antenna discussed here is the DCE-ANT 2314-RTNC because of its application in the field of military communications. In this article, we will discuss the application field and working principle of the DCE-ANT 2314-RTNC.

DCE-ANT 2314-RTNC is a low-profile, lightweight, inexpensive, and easy-to-install antenna designed specifically for military communication applications. It is an omnidirectional antenna that is capable of providing uniform coverage over a wide range of frequencies. In addition to military applications, it is also used in commercial and consumer applications.

DCE-ANT 2314-RTNC uses a linear antenna array of 8 radiating elements arranged in three columns, with center frequencies of 915, 1308 and 1593 MHz. The elements are arranged in a pattern to provide maximum radiation in the +Z direction (vertically) and minimum radiation in the -Z direction (horizontally). The antenna array is connected to a microcontroller which is used to vary the phase and amplitude of the antenna array in order to adjust the pattern and gain of the radiation pattern.

The antenna array is connected to a wideband Low Noise Amplifier (LNA) which amplifies the received signal by a certain amount to compensate for the losses in the antenna structure. This LNA is connected to a splitter which further amplifies the received signal while providing isolation between inputs and outputs. The output from the splitter is then sent to a multi-channel power divider which divides the signal evenly across the all the channels.

The DCE-ANT 2314-RTNC has a standard gain of +15 dBi and can provide a uniform coverage up to 10 km in radius. The antenna has a low electrical beamwidth of 25 degrees and a wide frequency range of 915 MHz to 1593 MHz. It is also resistant to hostile environments and has an excellent directivity and immunity to interference.

The DCE-ANT 2314-RTNC is designed to operate in both Tx/Rx and Rx-only modes and supports a wide range of data rates, modulation techniques, and coding schemes. It is capable of using Differential Modulation as well as Frequency Modulation for its transmission. The antenna also employs advanced error correction techniques to ensure reliable data reception.

The application field of the DCE-ANT 2314-RTNC is mainly the military communication applications. It is widely used for secure voice, video and data transmissions in battlefields and remote areas due to its excellent combination of high-gain, uniform coverage, low profile, and lightweight construction.

In conclusion, the DCE-ANT 2314-RTNC is an excellent antenna for military communication applications. It is lightweight, inexpensive, and easy to install, capable of providing uniform coverage over a wide range of frequencies and resistant to hostile environments. Its low-gain and wide frequency range make it ideal for secure voice, video, and data transmission in war zones and remote areas, providing reliable communication in challenging environments.

The specific data is subject to PDF, and the above content is for reference