DCM3623E50T13A6M00

Series:	VI Chip® DCM®
Part Status:	Active
Main Purpose:	DC/DC, Step Down
Outputs and Type:	1, Isolated
Power - Output:	160W
Voltage - Output:	12V
Current - Output:	13.4A
Voltage - Input:	9 V ~ 50 V
Regulator Topology:	Buck
Frequency - Switching:	--
Board Type:	Fully Populated
Supplied Contents:	Board(s)
Utilized IC / Part:	DCM3623x50T13A6yzz

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DCM3623E50T13A6M00 evaluation board is an off-line switch-mode power supply (SMPS) designed to provide efficient power conversion between AC and DC. It is designed for applications where high efficiency, low cost, high reliability and flexibility are key parameters. The module is suitable for a wide range of power applications including industrial, automotive, consumer and medical equipment.The evaluation board consists of two main components: a main switching power supply (MPSU) and a dedicated regulator for the protected rail(s). The MPSU provides the primary power conversion and the dedicated regulator is responsible for the output DC voltage. The output voltage is adjustable from 5 volts to 50 volts, and it can deliver a maximum power of 560W.The MPSU design incorporates active current sharing and provides a very high efficiency of up to 95%. This makes the SMPS suitable for applications where power savings are essential and heat generated should be minimized. The efficiency of the device can be further enhanced by connecting an external port-controlled Preregulator.The DCM3623E50T13A6M00 evaluation board incorporates dedicated protection functions such as over-temperature, over-voltage, under-voltage, open-load and short-circuit protection. These features make it suitable for a wide variety of different applications.The device utilizes an AC-DC topology. This means that the primary side of the module rectifies incoming AC power to a DC voltage value. This step-down voltage is then converted to a regulated DC voltage by the internal buck switching power supply. The MPSU then provides the load with a DC voltage adjusted to the desired output voltage.The SMPS offers an adjustable switching frequency, allowing for the optimization of efficiency. A minimum output voltage of 5 volts is achievable and the maximum can reach up to 50 volts. In order to maximize the efficiency of the device, the secondary winding is designed with a lower resistance than the primary.The reliability of the module is enhanced with the sacrificial FET-bridge that reduces EMC susceptibility. Additionally, the DCM3623E50T13A6M00 evaluation board is capable of working with a wide range of input voltages, allowing it to be used in a variety of applications.The DCM3623E50T13A6M00 evaluation board can be used in a wide range of applications where a low-cost, efficient, and highly reliable power solution is needed. This includes many types of electronic and electro-mechanical equipment such as pumps, motors, UPS systems, lighting, motors and drives, power supplies, and other products.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description