DCM4623ED2H31E0T70

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DCM4623ED2H31E0T70 is a evaluation board designed primarily for converting AC/DC (off-line) SMPS (switched-mode power supplies). This evaluation board is capable of providing versatile, efficient, and cost-effective solutions for a range of different applications.

When it comes to the DCM4623ED2H31E0T70, its main application fields are in power conversion & power conditioning, motor control and industrial automation, amongst others. Specifically, the DCM4623ED2H31E0T70 is capable of producing any step up or step down voltage within a range of 0.48V to 36V, including positive, negative, and bipolar output voltages.

The DCM4623ED2H31E0T70 comes equipped with a wide range of features and options including low power loss, wide input voltage range, wide temperature range, fast dynamic response, and high efficiency. It is also capable of producing a PFC (Power Factor Correction) output with low THD (Total Harmonic Distortion). Additionally, the DCM4631ED2H31E0T70 comes with a built-in temperature sensor and current monitoring.

When it comes to its working principle, the DCM4623ED2H31E0T70 uses a flyback topology for its buck-boost operation. In a buck-boost operation, the switch is opened and the inductor current decreases, causing the voltage to drop. The diode is then opened, which causes the energy stored in the inductor to flow back into the load. Although the voltage is dropped, it is still higher than the output voltage. The process repeats and the output voltage is regulated.

In a basic buck-boost configuration, the voltage is outputted at a constant value, whereas in the DCM4623ED2H31E0T70 the output voltage can be programmed for flexibility and is adjustable. This is set up by the addition of the controller IC (integrated circuit), which is connected to the input voltage, the current sense resistor, and the output filtering capacitor.

The controller IC samples the input voltage, and then compares it to the programmed output voltage. If the output voltage is higher than the set voltage, the controller reduces the inductor current. Conversely, if the output voltage is lower than the set voltage, the controller increases the inductor current. The inductor current is then regulated to maintain the output voltage constant.

Overall, the DCM4623ED2H31E0T70 is an ideal evaluation board to use when it comes to the task of converting AC/DC (off-line) SMPS. It is capable of providing efficient and cost-effective solutions, as well as a wide range of features and options. Furthermore, its flyback topology, used in its buck-boost operation, makes it able to adjust the output voltage to suit the given application.

The specific data is subject to PDF, and the above content is for reference