DEA162450BT-2174A1 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF filters are among the most important components in RF (Radio Frequency) systems. The DEA162450BT-2174A1 is an example of a RF filter that is used in the design of RF systems.

In order to understand the application field and working principle of the DEA162450BT-2174A1, it is necessary to look at the structure that is used in the construction of the filter. This RF filter is built with an input port, a band-stop filter, and an output port. It is a four pole band-stop filter with a Q value of 3.1 and a cutoff frequency of 16.2450 MHz. The band-stop filter is constructed with four inductors and four capacitors.

The input port is connected to a signal generator, which provides the signal that is to be filtered. This signal will pass through the input port and then through the four poles of the band-stop filter. The four poles will filter the signal to reduce unwanted noise and eliminate interference. The filter also uses additional components such as resistors and capacitors to reduce the passband ripple, which is the deviation in the amplitude of the signal as it passes through the filter.

Once the signal has been filtered, it is then sent to the output port. The filtered signal is then sent to the desired destination. The output port can be either an amplifier, a power supply, or any other device dependent upon the application. The output port can also be used to measure the signal quality of the filtered signal.

The DEA162450BT-2174A1 is a useful RF filter for a variety of applications. It is often used in RF applications such as communication systems, medical instruments, radar systems, and optical systems. In these applications, the filter is used to reduce unwanted noise and eliminate interference. The filter is also used in the automotive industry for temperature and engine control systems. In all these applications, the filter will reduce the amount of unwanted noise and interference from other sources.

The DEA162450BT-2174A1 is a band-stop filter that has a particular frequency range, which is between 16.2450 MHz and 174 A1. It is designed to reduce the amount of noise and interference in the desired frequency range. This filter has a high Q factor, which is an indicator of the filter\'s ability to reject signals outside of the desired frequency range. With its high Q factor, the filter can reject out-of-band signals while ensuring that signals within the desired frequency range remain clear and undistorted.

The DE162450BT-2174A1 filter is an example of a RF filter that is used in many different applications. Its four pole design and high Q factor make it ideal for filtering out noise and interference from a variety of sources. With its wide range of applications, the filter is a valuable tool in the design of communication systems, medical instruments, radar systems, and automotive systems.

The specific data is subject to PDF, and the above content is for reference