Allicdata Part #: | 296-22742-ND |
Manufacturer Part#: |
DEM-OPA-MSOP-2A |
Price: | $ 3.60 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Texas Instruments |
Short Description: | BOARD DEMO FOR 8MSOP DUAL OPAMPS |
More Detail: | 8-MSOP Package 2 - Dual Channels per IC General Pu... |
DataSheet: | DEM-OPA-MSOP-2A Datasheet/PDF |
Quantity: | 20 |
Lead Free Status / RoHS Status: | Not applicable / Not applicable |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 3.26970 |
Series: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Channels per IC: | 2 - Dual |
Moisture Sensitivity Level (MSL): | -- |
Amplifier Type: | General Purpose |
Output Type: | -- |
Slew Rate: | -- |
Voltage - Supply, Single/Dual (±): | -- |
Board Type: | Bare (Unpopulated) |
Supplied Contents: | Board(s) |
Utilized IC / Part: | 8-MSOP Package |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The DEM-OPA-MSOP-2A is an evaluation board that can be used for various applications involving operational amplifiers (op amps). This evaluation board can help engineers and designers understand and test the working of op amps, depending on the particular device, application, and environment. The board also offers a wide range of impedance loading and voltage swing test points, making it suitable for both high and low power applications.This evaluation board enables users to observe and analyze the performance of amplifiers with different parameters and configurations. It can also be used to test other analog components, such as transistors, resistors, capacitors, and diodes.
Working Principle
The DEM-OPA-MSOP-2A is an evaluation board that consists of two main sections, the power supply section and the signal conditioning section. The power supply section provides the necessary power to the board, and the signal conditioning section allows users to use the same input and output signal to analyze and measure the amplifier\'s performance parameters.In the power supply section, the board requires an input voltage between 5V and 24V. The board also has several PWM outputs, which can be used to adjust the power supply to the appropriate level. The board also comes with two +5V rails, one for the power supply and the other for the signal conditioning. The +5V supply voltage is used to power the evaluation board and for proper voltage translation.In the signal conditioning section, the board has several conditioning circuits and network that can be used to adjust the gain and frequency response of the amplifier. The gain of the amplifier can be adjusted by connecting a potentiometer to the output of the amplifier and adjusting the resistance. The frequency response can then be adjusted by connecting the input of the amplifier to a fixed frequency source, such as a Sigrok AP300 frequency generator.The board also offers various test points for measuring the voltage, current, and other parameters of the amplifier. These test points can be used to measure the output power, frequency, and other parameters of the amplifier. The test points can also be used to measure the noise generated by the amplifier, as well as the common-mode and rail-referenced noise. The board can also measure the phase shift, distortion, and other parameters of the amplifier.
Application Fields
The DEM-OPA-MSOP-2A can be used in a variety of applications including audio, low-power system design, high-frequency design, and power conditioning. In audio applications, the board can be used to evaluate low-noise op amps, adjust the gain of the amplifier, and measure the output power. In high-frequency design applications, the board can be used to evaluate a range of transistors and compare their performance.In low-power system design applications, the board can be used to evaluate low-power amplifiers. The evaluation board can also be used to adjust the gain of the amplifier, measure the output power, and test the frequency response of the op amp.In power conditioning applications, the board can be used to evaluate and compare the performance of multiple op amps. The board can also be used to adjust the gain and frequency response of the op amp, measure the output power, and measure the ripple and harmonic distortion levels.
The specific data is subject to PDF, and the above content is for reference
EVALUATION KIT, PA01, PA10, PA12PA01, PA...
BOARD EVAL FOR AD8014AR8-SOIC Package 1 ...
BOARD EVAL FOR AD8009SOT-23-5 Package 1 ...
BOARD EVALUATION FOR AD8017AR8-SOIC Pack...
EVALUATION KIT FOR PA74PA74 Apex Precisi...
BOARD EVALUATION FOR AD605AD605 X-AMP Se...