DF12E(3.0)-32DP-0.5V(81)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DF12E(3.0)-32DP-0.5V(81) Application Field and Working Principle

DF12E(3.0)-32DP-0.5V(81) connectors, as a kind of edge type of rectangular connectors, are widely used in computing, communications and consumer electronics. With a total of 32 contacts, its edge connectors are ideal for dense, high-speed board stack applications. This type of rectangular connectors array are also classified as mezzanine (board to board) connectors since their use is primarily used in boards to boards stack applications.

The DF12E(3.0)-32DP-0.5V(81) connectors is composed of a mating system composed of two circuits which allows for inter-connecting between printed circuit boards , ribbon cables or solid wires. It utilises a dual row design in which the size divides the total number of pins in half. It have 32 contacts with regular 0.5 mm centre spacing.

The working principle of this rectangular connector is as follow, first the contacts are inserted from the bottom side of the printed circuit board (PCB). After inserting the contacts, they should then be soldered into place, which would then allow a permanent connection between the pairs. After soldering, either a plastic shell or heat shrink cover can be applied to the top of the pins. This provides protection to the exposed pins.

The structure of DF12E(3.0)-32DP-0.5V(81) connectors consists of an insulator, conducting current, inner contact, terminal and other components. The contact points, which give electrical connection, is made of a copper alloy for DF12E(3.0)-32DP-0.5V(81) connectors. Meanwhile, the insulator material is primarily made of thermoplastic, which ensures maximum reliability and durability.

In conclusion, the DF12E(3.0)-32DP-0.5V(81) connectors, as a kind of rectangular connectors and part of the mezzanine (board to board) range, is used mainly in computing, communications and consumer electronics applications. Its dual row design and 0.5 mm centre spacing make it ideal for dense, high-speed board stack applications. Its contacts are made of a copper alloy for DF12E(3.0)-32DP-0.5V(81) connectors, and the insulator material is mostly thermoplastic. This brings features of maximum reliability and durablity.

The specific data is subject to PDF, and the above content is for reference