DF15005S-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers

The DF15005S-G is a four terminal device which is used as a bridge rectifier, combining four diodes into a single package. This type of device has multiple uses, including rectifying AC voltages to DC voltage. The device is widely used in AC/DC power supplies, UPS systems, battery charger and other types of power conversion systems. Input voltage is applied to two opposite terminals of the bridge rectifier while the two other terminals are connected to a common point, such as the ground. The bridge rectifier can provide a higher current through a relatively low input voltage, making it a popular choice for electronics circuitry.

A bridge rectifier is composed of four diodes that form a bridge configuration. These four diodes are connected in what is called a full-wave rectification circuit. As shown in Figure 1, each diode is in a reverse-biased arrangement, so that current only flows if the voltage at the anode side is greater than the voltage at the cathode side. During operation, only two of the four diodes will conduct at any one time, depending on the input voltage polarity. For example, if a positive voltage is applied to one end of the bridge rectifier, then diode D1 and D4 will conduct and diode D2 and D3 will be in a reverse-biased state.

When an alternating current (AC) voltage is applied across the bridge rectifier, it rectifies the input AC voltage, producing an output DC voltage which is proportional to the average value of the input AC voltage. As noted earlier, two of the four diodes in the bridge rectifier only conduct at any one time, which allows current to flow through the bridge rectifier during both the positive and negative half-cycles of the input AC voltage. Thus, the bridge rectifier allows unidirectional current flow and produces a DC voltage with an AC ripple. The bridge rectifier is also known as an AC to DC converter as it converts AC voltage across the input terminals to DC voltage across the output terminals.

The DF15005S-G has a number of advantages over other types of rectifiers such as a full-wave center tap rectifier. First, the bridge rectifier does not require a center tap connection, resulting in a simpler circuit. Second, it offers a higher efficiency than the center tap rectifier, as it supplies the load with both the positive and negative half cycles of the AC voltage. Third, the bridge rectifier is more compact than the center tap rectifier, as it is essentially a 2-terminal device (the two ends of a diode). Finally, it also offers a higher surge current capability.

In conclusion, the DF15005S-G bridge rectifier provides an efficient, compact and reliable way to rectify AC voltage and convert it to DC voltage. It is widely used in a variety of electronics applications, including AC/DC power supplies, UPS systems, battery chargers and other types of power conversion systems. The bridge rectifier offers a number of advantages over other types of rectifiers, such as a higher efficiency, higher surge current capability, and a smaller footprint.

The specific data is subject to PDF, and the above content is for reference