DF1E-10P-2.5DS

DF1E-10P-2.5DS is a rectangular connector which is a type of header or male pin. It is used for connecting wire-to-wire in electronic circuit applications. It is a type of board-level mating connector which provides more efficient and reliable transmission of signals and electrical energy. This type of connector is ideal for use in low-profile and miniaturized electronic applications where there are less vertical and transverse distances available.

DF1E-10P-2.5DS comes with a 2.54 mm center-to-center pitch and a 1 mm pitch for fine-pitch applications. It is equipped with an 10-pin, 50 ohm piece design. It is made of copper alloy shells and is finished with re-flow solder coating. It is able to withstand temperatures up to 125°C. DF1E-10P-2.5DS also features a lightweight design and an easy and quick installation.

The working principle of the DF1E-10P-2.5DS connector is based on the principle of electrical connections between the male and female contact in the electrical circuit. The contacts that form the two connecting pins are springy, enabling their connection to be established with a minimum of stripping and insertion force. The contact pins also make an electrical connection through the use of electrical resistance, which reduces the amount of voltage loss and electric current leakage.

The internal connection of this type of connector is made by pushing the male and female connection pins into their respective connections and then aligning the contact points with a plug-and-play system. Once the connection is made, the electrical circuit is able to transfer desired current. The contacts are held securely in place by the connector fastener. This prevents the contacts from being accidentally disconnected or jostled out of place by the application of force.

DF1E-10P-2.5DS connectors are widely used in automotive, communications, computer and other electronic industries. They are mostly used to interconnect two electronic components such as a transceiver and a controller, for example. The contact points of the connector are designed to provide greater conductivity and signal integrity, allowing for a better data transfer rate. This also reduces the possibility of interference or signal degradation.

DF1E-10P-2.5DS connectors are reliable and efficient, making them a popular choice for electronic circuit applications. They are easy to install and are designed for use in low-profile and miniature applications. Furthermore, the connector\'s resistance to temperatures of up to 125°C adds to its reliability and robustness.