DF3-10P-2V(20)

DF3-10P-2V(20) connectors, classified under the rectangular connectors – headers, male pins, are connectors with a higher current rating, anti-vibration protection, and a higher number of mating cycles. They also feature a reduced mating force, designed to make their insertion into the header easier. The DF3-10P-2V(20) connectors are typically used in data communication, as signal transmission connectors, and are found in many communication systems, such as mobile phones, computers, and networks.

The DF3-10P-2V(20) connector is composed of a connector body, a diaphragm, and a conductor.

The connector body is made up of two halves, a cable holder, and a spacer. The connector body is designed to be strong, and will hold the other components firmly in place using some form of latch. The body also contains a vented area where the diaphragm is placed, allowing air to escape when the connector is mated. The cable holder is a small section of metal located between the two halves of the connector body. This section holds the outer part of the cable securely in place and prevents it from being pulled out of the terminal. The spacer is a small piece of plastic or other material placed between the two halves of the connector body and helps to keep them evenly spaced.

The diaphragm is a thin sheet of plastic or other material that fits inside the vented area of the connector body. When the connector is mated, it creates an airtight seal that protects the connections from dust and moisture. The diaphragm also helps to reduce the cost of the connector because it can be reused.

The conductor is the part of the connector that holds the wires and other electrical connections in place. The conductor is typically composed of a shell, an insert, and a pin. The shell is the outer portion of the conductor and is designed to protect the wires and connections, while the insert is the inner part of the conductor that holds the wires and connections in place. The pin is the small metal piece that makes contact with the other component and completes the electrical connection.

The working principle of the DF3-10P-2V(20) connector is relatively simple. When the connector is mated, the pin presses against the other component and a spring force is applied, providing a secure connection. To release the connector, the force is released and the connector can be easily removed.

The DF3-10P-2V(20) connector is primarily used in data communication, as a signal transmission connector. It is found in a wide range of communication systems, such as mobile phones, computers, and networks. It also has a high current rating, anti-vibration protection, and a higher number of mating cycles than other similar connectors. Finally, the connector has a reduced mating force that makes insertion into the header simpler.